Questions and Answers for Saint-Gobain ADFORS FibaTape Standard Yellow 1-7/8 in. x 300 ft. Self-Adhesive Mesh Drywall Joint Tape

A:  The tape is flexible when applied but once embedded in joint compound it dries strong and hard.

A:  If you are using the tape to repair a damaged wall that is covered with semi-gloss latex paint, we would recommend prepping the surface with a fine grit sand paper prior to applying the tape. Be sure to wipe the surface clean of any dust and debris before applying.

A:  It came out in the late 1980s early 90s . It’s better and more convenient as well.

A:  This joint tape has no fire rating. Mike

A:  This product has not been tested for fire resistant attributes.

A:  We do not recommend using this tape where texture will be applied.

A:  Yes, you can used this tape on smooth wood walls.

A:  Yes. I believe it is made from fiber glass.

A:  Yes, the adhesive is made of fiberglass mesh.

A:  yes,easy to woo\rk with

A:  Hello, I use pre-mixed joint compound all the time with this tape

A:  Using either the hot mud or the pre mixed will work well, but be careful if you use hot mud not to work it too long... if the mud gets stiff and you are still working it, it tends to dislodge the tape

A:  We recommend using an all-purpose, pre-mixed mudd but it is OK to use hot mud as well. If you have additional questions, please contact our customer service department at 1-800-762-6694. Thanks!

A:  If you are using this type of material, we recommend bending the tape to a right angle and the pushing it into the corner securing it to both sides. You can also use Corner Tape which is already bent to a 90 degree angle for easier application.