Questions and Answers for Rust-Oleum Stops Rust 1 qt. Protective Enamel Satin Black Interior/Exterior Paint (2-Pack)

A:  Great question! Rust-Oleum Stops Rust Protective Enamel Paint can be applied to cured cement surfaces. Please keep in mind, this paint is not suitable for use on surfaces that will be driven on, walked on, or immersed in water. - Rust-Oleum Product Support 3

A:  Thank you for reaching out, Jess. Yes, Rust-Oleum Stops Rust Satin Protective Enamel Paint can be applied to treated wooden surfaces like your fence. -Rust-Oleum Product Support 14

A:  We're happy to help, Bryan. While any additional tint or colorant can not be added to Rust-Oleum Stops Rust Protective Enamel, you can mix multiple colors of Stops Rust to create a custom color. We recommend mixing all your paint at the same time to ensure for a consistent finish across your project. -Rust-Oleum Product Support 14

A:  We're happy to help, Sheri. Rust-Oleum Stops Rust Protective Enamel can be applied directly to outdoor non-galvanized metal surfaces without the need of a primer. Be sure to thoroughly clean the surface using a degreasing detergent to ensure for the best adhesion. -Rust-Oleum Product Support 14

A:  We're happy to help! Yes, Rust-Oleum Stops Rust Protective Enamel can be applied to the interior and exterior sides of your door. When painting previously coated surfaces remove any loose paint using a wire brush and then clean the surface using a degreasing detergent. Glossy surfaces should also be sanded before cleaning to help build a surface profile. -Rust-Oleum Product Support 14

A:  We're happy to help, Greg. When applying Rust-Oleum Stops Rust Protective Enamel Paint with an air paint sprayer, you can thin up to 15% with acetone. If using an airless, thinning is not typically required. Make sure to follow the recommendations for your paint sprayer as well for the best results. -Rust-Oleum Product Support 14

A:  Happy to help! When applying Rust-Oleum Stops Rust Protective Enamel Paint to bare metal, we do recommend a primer for the best coverage and adhesion. Keep in mind, while matte finishes will hide scuff marks and surface imperfections better, these finishes tend to stain or hold on to dust/dirt easier than a glossy finish. We would recommend waiting at least 7 days after application before cleaning the surface to allow the paint to fully cure. - Rust-Oleum Product Support 3