Q:Will this product adhere to plastic-capped truck running boards?
by|Feb 6, 2022
1 Answer
Answer This Question
A: Happy to help Dee. Rust-Oleum Stops Rust Anti-Slip Spray can be applied to concrete, metal and wood, it cannot be applied to plastic.
- Rust-Oleum Product Support 6
by|Jul 27, 2023
1 found this answer helpful
Q:Does it work well for a sun exposed tiled staircase In tropical climate where the temp reaches 90 degrees routinely?
by|Jun 3, 2021
1 Answer
Answer This Question
A: Thank you for reaching out, Ronnie. Rust-Oleum Stops Rust Anti-Slip Spray is recommended for application to concrete, metal, and wood surfaces. It can be used in exterior conditions and warm climates but is not suggested for application to tile. - Rust-Oleum Product Support 4
by|Jun 3, 2021
Q:can this be used on a aluminum truck ramp
by|Apr 22, 2021
1 Answer
Answer This Question
A: Great question! Rust-Oleum Stops Rust Anti-Slip Spray can definitely be used on an aluminum surface. You will just need to ensure that the area is cleaned thoroughly first to ensure adhesion. - Rust-Oleum Product Support 5
by|Apr 26, 2021
Q:Can it be use on painted metal plate?
by|Mar 23, 2021
2 Answers
Answer This Question
A: Happy to help Rigo. Rust-Oleum Stops Rust AntiSlip Spray creates a non-skid surface on concrete, metal and wood, it can be applied over painted metal. The fast drying formula dries clear and can be applied to ramps, stairs and railings.
- Rust-Oleum Product Support 6
by|Mar 23, 2021
A: No. Only good for wooden decks.
by|Feb 1, 2023
Q:I noticed this product is oil-based. Can I use it on a deck painted with latex paint?
by|Nov 5, 2020
1 Answer
Answer This Question
A: Thank you for reaching out! While our Rust-Oleum Stops Rust AntiSlip Slip Resistant Coating is a solvent-based spray, it may be applied over either oil or water-based painted surfaces as long as the paint is fully cured. To ensure the paint is fully cured, we recommend waiting a minimum of 7 days before applying the AntiSlip coating. - Rust-Oleum Product Support 2
by|Nov 5, 2020
Q:can this be used on engineered hardwood flooring
by|Nov 3, 2020
1 Answer
Answer This Question
A: Happy to help! Rust-Oleum Stops Rust Anti-Slip Spray can be used on concrete, metal, and wood surfaces. We recommend lightly sanding glossy surfaces or previously finished surfaces.
- Rust-Oleum Product Support 3
by|Nov 4, 2020
Q:Can this product be used on epoxy garage floors?
by|Jul 31, 2020
1 Answer
Answer This Question
A: Thank you for reaching out! Rust-Oleum Anti-Slip Spray can be used on garage floors. However, to ensure full adhesion, glossy surfaces do need to be sanded to ensure full adhesion.
- Rust-Oleum Product Support 3
by|Jul 31, 2020
Q:Can this be used on matte finish porcelain tiles?
by|Jul 10, 2020
1 Answer
Answer This Question
A: Thank you for your response, Lauren. Rust-Oleum Stops Rust Anti-Slip Spray is suitable for use on concrete, metal, and wood surfaces only. It will not be able to adhere to porcelain tile well. We need to know more about your application to make the best recommendation for you. Please feel free to call us at 800-350-1901 to discuss further. - Rust-Oleum Product Support 5
by|Jul 10, 2020
Q:Anybody try it on a slippery-when-wet slate walkway?
by|Jun 22, 2020
1 Answer
Answer This Question
A: We appreciate your interest! Rust-Oleum Stops Rust Anti-Slip Spray is intended for use on concrete, metal and wood surface. Other surfaces would need a test application first to ensure proper adhesion.
- Rust-Oleum Product Support 3
by|Jun 24, 2020
Q:Can this be used on the bottom of a rug
by|May 29, 2020
1 Answer
Answer This Question
A: Good question Curt! Rust-Oleum Stops Rust Anti-Slip Spray creates a non-skid surface on concrete, metal and wood, it cannot be applied to the bottom of a rug,
- Rust-Oleum Product Support 6