Q:What is the distance between the floor to the first support bar?
by|Jan 13, 2017
1 Answer
Answer This Question
A: Hello, Thank you for your interest in our RiverRidge® X-Frame Spacesaver. The space from the floor to the bottom of the lower back support bar is 7.75". Please feel free to contact us with any additional questions at customer.service@ssi-rr.com. Thank you!
by|May 4, 2023
Q:Is this difficult to assemble?
by|Nov 20, 2016
5 Answers
Answer This Question
A: No not difficult to assemble
by|Sep 6, 2019
A: no.
by|May 5, 2023
A: Thank you for your interest in our RiverRidge X-Frame Spacesaver. We aim to make all products user friendly with simple assembly. Detailed assembly instructions with images are included in each product package and are also available on our website at www.riverridgehome.com. Please feel free to contact us with any additional questions at customer.service@ssi-rr.com. Thank you!
by|May 4, 2023
A: Simple to put together
by|May 4, 2023
A: Not at all.
by|May 4, 2023
Q:Can the bar be added after the shelf is placed over the toilet?
by|Mar 29, 2016
2 Answers
Answer This Question
A: Yes, you can install this in a tight space.
by|May 3, 2023
A: Hello, Thank you for your interest in our RiverRidge® X-Frame Spacesaver. This widest point of this cabinet is 25.98". This is the minimum space required to fit the cabinet's width. The bottom bar is screwed on to the two legs from the outer-part of the legs so if there is no extra space on either side of the cabinet, it will not be possible to assemble the bottom support bar. If there is space on either side of the cabinet after being placed behind the toilet, this bottom support bar most definitely can be installed after placement. I hope this information helps. If you have nay additional questions please contact us at 844.223.5201or customer.service@ssi-rr.com. Thank you1
by|May 3, 2023
Q:how far off the ground is the crossbar at the bottom?
by|Jan 3, 2016
3 Answers
Answer This Question
A: The bottom crossbar is exactly at the level where the water supply fixture comes in from the wall. So I used the crossbar as a wall mount at the top of the storage space saver.
by|May 5, 2023
1 found this answer helpful
A: Crossbar is 8 inches from the floor to the bottom of the crossbar.
The unit was easier to install without the crossbar at first to clear the minimal distance between the wall and toilet.
I then installed the crossbar after setting the unit in place using an offset screwdriver due to tight spacing in this bathroom.
by|May 4, 2023
1 found this answer helpful
A: Hello Lawyer123,
Thank you for your interest in our RiverRidge® X-Frame Spacesaver. The crossbar at the bottom is approximately 6 inches from the floor. This unit is built to fit around a standard sized toilet and water lines. Please contact us at 884.223.5201 or customer.service@ssi-rr.com with any additional questions.
Thank you!
by|May 3, 2023
Q:What is the height from the floor to the first shelf?
by|Dec 31, 2015
2 Answers
Answer This Question
A: 32 inches from the floor to the underside of the crossbar support of the bottom shelf. The shelf hangs out in front of this support member and the bottom of the shelf (in front of the cross member support) is 33.25 inches which perfectly allows my toilet lid to rest under.
by|May 5, 2023
A: Hello Jess, Thank you for your interest in our RiverRidge® X-Frame Spacesaver. The space from the floor to the bottom shelf is 32" in height. Please let us know if you have any additional questions by contacting us at 844.223.5201 or customer.service@ssi-rr.com. Thank you!