Q:Can these shelves be installed on non-wood cabinets (pressed wood)?
by|Feb 28, 2017
4 Answers
Answer This Question
A: Almost all cabinets are pressed wood
by|Feb 10, 2019
1 found this answer helpful
A: Yes - just predrill small shallow pilot holes so the real screws have pressed wood to grip.
by|May 4, 2023
A: Yes, just be careful when installing to no strip out the holes in the cabinet.
by|Mar 26, 2019
2 found this answer helpful
A: Yes
by|May 5, 2023
Q:Can you stack these and add a second shelf or can this be mounted by by the sides of the cabinet instead of the bottom?
by|Sep 12, 2016
4 Answers
Answer This Question
A: The pullouts can't be stacked with the current slides. The slides are meant to be attached to the base.
by|May 4, 2023
2 found this answer helpful
A: This particular unit only mount to the floor of the cabinet and not the sides.
by|May 4, 2023
2 found this answer helpful
A: No
by|May 5, 2023
2 found this answer helpful
A: The track mounts on the bottom
by|May 5, 2023
Q:Is it possible to buy the slides without the drawer?
by|Jun 27, 2016
3 Answers
Answer This Question
A: I doubt it. You might want to check with the vendor if you have the part # for the slides.
by|May 4, 2023
A: No unless it’s for the garbage can
by|May 5, 2023
A: You would have to contact Rev-A-Shelf directly for replacement parts.
by|May 3, 2023
Q:Another width question
by|Feb 16, 2016
2 Answers
Answer This Question
A: Actually not conflicting info, just a little unclear and i apologize. The product is indeed 11" wide and was designed for a cabinet with a 12" opening. The reason the 12" is given, is because some unknowns that differ from cabinet to cabinet is things like cabinet construction and cabinet door hinges that could interfere with the product. If your opening is indeed 11.5" you should be fine. I am also assuming that your hinges are not excessively large. Again, the drawer is 11" wide.
by|May 3, 2023
1 found this answer helpful
A: I hadn’t thought about the hinges until I read your reply. I realized I had not considered them, so I measured again. I lost about ¼ inch at the hinges but that means I still have (slightly) more that the required 11 inches. I plan to buy.
Thanks.
by|May 3, 2023
1 found this answer helpful
Q:How much weight can it withstand?
by|Aug 12, 2015
2 Answers
Answer This Question
A: The vendor rates these at 50 lbs.
by|May 4, 2023
A: The slide system is 50 lb weight rated.
by|May 3, 2023
1 found this answer helpful
Q:Are the slides located on the bottom or sides? My cabinet is a double wide and does not have a wall in the center.
by|Jun 3, 2015
4 Answers
Answer This Question
A: The 3/4 extension slides are concealed bottom mounts.
by|May 3, 2023
4 found this answer helpful
A: The slides are on the bottom - you'll need to replace the rounded head screws with flat head screws if you want a smooth slide in/out of cabinet.
by|May 4, 2023
A: The slides are on the bottom.
by|May 4, 2023
2 found this answer helpful
A: From the bottom. You do not need side walls .
by|May 4, 2023
1 found this answer helpful
Q:How many slide outs come in A BOX?
by|May 26, 2015
5 Answers
Answer This Question
A: There are 2 on the bottom of each box.
by|May 4, 2023
A: 2
by|May 4, 2023
A: There is only one pull out drawer with the purchase.
by|May 3, 2023
A: One slide out per box.
by|May 4, 2023
A: The unit comes with one drawer and two slides.
by|May 3, 2023
Q:how wide is this shelf?
by|May 1, 2015
2 Answers
Answer This Question
A: The product is only the Rev-A-Shelf Small Pull-Out Wood Drawer. The image show the drawer installed in an existing cabinet.