Q:My cabinet opening is exactly 11”
Will the 11” slide-out work?
by|May 6, 2020
2 Answers
Answer This Question
A: Product specs state that the opening needs to be 12" minimum.
by|May 9, 2020
A: The Rev-a-shelf is EXACTLY 11” wide. I doubt it will work for you.
by|May 12, 2020
Q:Looking for a 2 foot by 7 feet high cabinet with pull out drawers and cabinet opening on top
by|Jan 23, 2020
0 Answer
Answer This Question
Q:I need 3 of these shelves but would like to have them 24 in deep instead of 18.5. is there such ...
by|Oct 4, 2018
0 Answer
Answer This Question
Q:The width of my cabinet opening is 11.5....is this drawer too wide to fit?
by|Sep 24, 2018
5 Answers
Answer This Question
A: The width of the drawer itself is 11". You'll want some space on either side so the drawer glides in and out easily.
by|Feb 3, 2019
1 found this answer helpful
A: I installed this unit in a kitchen cabinet with a 12" wide opening. The unit is 11" wide which allowed sufficient space on each side of the drawer to clear the opening.
by|Jul 17, 2020
2 found this answer helpful
A: Yes, this product requires a minimum cabinet opening width of 12 inches.
by|May 6, 2023
A: I think it will fit ok, because the track is inside the cabinet. You might need to move it a little away from the door hinge instead of in the center of the cabinet.
by|Jul 17, 2020
A: It's outside dimension is 11", and the roller bracket sits underneath, so as long as the bracket is centered in the opening and is straight, the opening should be wide enough.
by|May 25, 2020
2 found this answer helpful
Q:My kitchen cabinet width is 13 and depth is 22 which measurement pull out drawer should I buy
by|Jul 15, 2018
3 Answers
Answer This Question
A: If your 13" width is the opening measurement, the 5.62 in x 11 in x 18.5 in pull out drawer is your best option .
by|May 5, 2023
A: Why not. It will fit and extremely easy to install
by|May 5, 2023
A: The 11 inch wide X 18.5 inches long drawer should fit just fine. If this is a sink cabinet you need to consider any plumbing or garbage disposal materials that may be hanging down from the sink.
by|May 5, 2023
Q:Can it be installed in with the width and depth reversed? Looking to install on an 11" shelf.
by|Jan 17, 2018
3 Answers
Answer This Question
A: No, it can only be installed in the 18.5" depth direction.
by|May 5, 2023
A: No. The drawer will only slide out one way.
by|May 5, 2023
A: Will not work
by|May 5, 2023
Q:Can this 11 x 18.5 work in a cabinet that is 15 x 18.5 ????
by|Jan 13, 2018
8 Answers
Answer This Question
A: Yes, the cabinet can be larger than the drawer.
by|May 5, 2023
A: Yes
by|May 5, 2023
A: Yes, but there will be 2" space on each side if you center the shelf in your 15" opening. The shelf is 11" wide and your opening is 15".
by|May 5, 2023
A: Yes, this will work
by|May 5, 2023
A: Yes, that is what my cabinets are too.
by|May 5, 2023
A: My cabinet space was less than 15 inches and it fit perfectly. It is s great pull out. Very sturdy and easy to pull out.
by|May 5, 2023
A: yes, but it will leave extra space on either one or both sides
by|May 5, 2023
A: Assuming the 18.5 is the depth of the cabinet, yes. The hardware for the pull out is all underneath the drawer, so the full width of the drawer is 11 inches. There should be plenty of space in a 15 inch opening.
by|May 5, 2023
Q:Can the cabinet door be attached to pull out? I there a kit for this?
by|Jun 15, 2017
3 Answers
Answer This Question
A: Not readily
by|May 5, 2023
A: No - why would you attach the door to the pullout?