A: Hello, Barb. Thank you for reaching out to us. The preferred term is powder loads, so as not to misinterpret their design intent. These are solely to be used in the correct tools in the proper applications. If you have more questions on their function, please feel free to reach us at 800-222-6990. Thanks again.
by|Mar 4, 2024
Q:I’m anchoring a galvanized shed to a cement slab should I use the yellow shots?
by|Jan 7, 2024
1 Answer
Answer This Question
A: Hi Thomas, please always conduct a test fastening using a lower power level to determine what power level is appropriate and if the base material is suitable for fastening. Please contact our Customer Experience team at (877) 489-2726 if you have any additional questions. Thank you!
by|Jan 11, 2024
Q:How many boxes in a case?
by|Oct 28, 2023
1 Answer
Answer This Question
A: Hi Frank, there are 100 loads in each box of Ramset 0.22 Caliber Yellow Single Shot Powder Loads. Please contact our Customer Experience team at (877) 489-2726 if you have any additional questions. Thanks!
by|Nov 2, 2023
Q:What color Ramset is best for 2x4 into cider block
by|Jun 11, 2023
1 Answer
Answer This Question
A: Hi, the Ramset 0.22 Caliber Brown Single Shot Powder Loads may be suitable for fastening a 2x4 into cinder block but it is always required to make a test fastening to determine the suitability of the base material and the strength of the powder load. A center punch test should also be conducted to ensure the suitability of the base material. Please make sure to follow all instructions outlined in the tool user manual and contact our Customer Experience team at (877) 489-2726 if you have any additional application questions. Thank you!
by|Dec 14, 2023
1 found this answer helpful
Q:What size pin and color load should I use on a 2x4 against concrete garage wall?
by|May 22, 2023
1 Answer
Answer This Question
A: Dear Valued Home Depot Customer,
We have reached out to the manufacturer and their answer is,in order to determine what load strength to use, you must first conduct a test fastening with the lowest power level, as outlined in the user manual. The pin size depends on your specific application and we need a bit more information to be able to answer that. Please contact our Customer Experience team at (877) 489-2726 so we can better assist you.
by|Jun 9, 2023
Q:What length of nails can I use
by|May 16, 2023
2 Answers
Answer This Question
A: Hi, the length of pin depends on the application. Please make sure to only use hardened steel pins designed for use with powder actuated tools. For more specific application questions, please contact our Customer Experience team at (877) 489-2726. Thanks!
by|May 18, 2023
A: I have only used 3 inch nail with they yellow.
by|Oct 10, 2023
2 found this answer helpful
Q:What color Ramset 22?s is best for my starters? pistol
by|Mar 12, 2023
2 Answers
Answer This Question
A: Hi, Ramset 0.22 Caliber Single Shot Powder Loads are only for use in Ramset Powder Actuated Tools. These loads are not to be used in any other application. Thanks!
by|Mar 17, 2023
A: Depends on your starter pistol I’ve tried the yellow on two of them and couple rounds latter it fell apart so I would try the brown just to be safe I am not sure about green. And also some starter pistols you have to modify the revolver by drilling in where the round goes because these can be too long for some pistols and it has a stop to prevent you from fitting a real bullet round. I would not try anything higher than a brown try green at your risk.
by|May 5, 2023
Q:Can you use Ramset .22 caliber single shots with a Remington Tool?
by|Nov 15, 2022
1 Answer
Answer This Question
A: Hi Zach, these Ramset 0.22 Caliber Yellow Single Shot Powder Loads can be used in all 0.22 Caliber Powder Actuated Tools per the ANSI A10.3 standard.