A: Hello, Dane - Thank you for your question. Yes! All of the bearings in this tool are lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. Therefore, no further lubrication is required. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the Corded 4 in x 36 in. Belt and 6 in. Disc Sander. - Jewel
by|Jan 7, 2024
1 found this answer helpful
Q:Can someone tell me the exact dimensions of the hole pattern on the base? I'm adding threaded inserts to my workbench and can't quite get them closer to +_1/8 of an inch.
by|Mar 19, 2023
1 Answer
Answer This Question
A: Hello, Luchito - Thank you for your question. I'm sorry, this information is not listed. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the Corded 4 in x 36 in. Belt and 6 in. Disc Sander. - Jewel
by|Mar 21, 2023
Q:What is the horsepower?
by|Feb 5, 2023
1 Answer
Answer This Question
A: Hello, Chase - Thank you for your question. This tool is rated at 1/2 HP. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the 4 in x 36 in. Belt and 6 in. Disc Sander. - Jewel
by|Feb 8, 2023
Q:Where is it made?
by|Jan 31, 2023
1 Answer
Answer This Question
A: Hello, Davidp - Thank you for your question. This tool can be made in the US, France, or China. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the 4 in x 36 in. Belt and 6 in. Disc Sander. - Jewel
by|Mar 13, 2024
3 found this answer helpful
Q:Does anyone know why this one is $200 when the same machine, different brand (WEN) is $130? It seems this same machine is made for manty different brands, but I CANNOT FIND A DIFFERENCE.
by|Dec 23, 2022
2 Answers
Answer This Question
A: here's a good article on this: https://toolguyd.com/benchtop-power-tool-clones-conundrum/
by|Jan 7, 2024
3 found this answer helpful
A: Hello, Louy - Thank you for your question. Unfortunately, we are not familiar with other brands in order to compare why the prices may be different. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the 4 in x 36 in. Belt and 6 in. Disc Sander. - Jewel
by|Dec 29, 2022
Q:Is there a buffer pad available for this? For buffing out smooth materials (e.g. Leather) in addition to metal?
by|Dec 16, 2022
3 Answers
Answer This Question
A: Hello, Stefan - Thank you for your question. I'm sorry, no. There is not a buffer pad for this tool. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the 4 in x 36 in. Belt and 6 in. Disc Sander. - Jewel
by|Dec 18, 2022
A: Any 6 inches pad can be added,better self is timing
by|Feb 5, 2023
A: Hi Stefan.
Thank you for shopping at the Home Depot.
For accessory information for your RYOBI Belt and 6 in. Disc Sander, please contact RYOBI customer Service at:800-860-4050 opt 2 then opt 3.
You can also visit your local Home Depot Hardware Department and check with a Hardware Associate for RYOBI sanding accessories.
Please let us know if we can be of further assistance.
Rick_HD_OC
by|Dec 16, 2022
Q:are the discs hook and loop?
by|Dec 9, 2022
3 Answers
Answer This Question
A: No, they are adhesive backed.
by|Dec 15, 2022
A: Hello, Mongo - Thank you for your question. I'm sorry, no. The discs are not hook and loop. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the 4 in x 36 in. Belt and 6 in. Disc Sander. - Jewel
by|Dec 13, 2022
A: No, they're adhesive.
by|Dec 16, 2022
Q:Is the base metal or plastic
by|Nov 19, 2022
2 Answers
Answer This Question
A: Base is metal
by|Oct 11, 2023
A: Hello, Dutch - Thank you for your question. The base is cast metal. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the 4 in x 36 in. Belt and 6 in. Disc Sander. - Jewel
by|Dec 20, 2022
Q:4in x 36in with 6 in belt sander.
Do they make a dust bag to fit
by|Nov 13, 2022
2 Answers
Answer This Question
A: I don’t think a dust bag would be a good solution or if they make one. I attach the hose from my 16 gal Ridig shop vac directly to the sander.
by|Jan 21, 2023
A: Hello, Arnie - Thank you for your question. I'm sorry, this product does not have a dust bag to fit. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the 4 in x 36 in. Belt and 6 in. Disc Sander. - Courtney
by|Nov 14, 2022
Q:I just got my sander and when I start to sand a piece of wood the belt stop
by|Aug 11, 2022
2 Answers
Answer This Question
A: Hello, Rob62 - Thank you for your interest in the 4 in x 36 in. Belt and 6 in. Disc Sander. I apologize for that inconvenience. If you would like to go through troubleshooting I would recommend contacting us directly.
A RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. I hope this helps! --Jewel