Questions and Answers for Orbit 2 in. 1/2-Pattern Spring-Loaded Pop-Up Sprinkler with Twin-Spray Brass Nozzle

A:  by loosening the screw at the top you can get a a little more coverage.

A:  Tom, the phrase "righty-tighty, lefty-loosey" applies here: clockwise rotation of the screw will tighten/lessen the spray distance, while counter-clockwise rotation will allow for greater spray distance. Please feel free to contact our Support team at 1-800-488-6156, and we'd be happy to help in any way we can. Thanks!

A:  I used 1/2" cpvc, but if you want more volume you could use 3/4". You would just need to reduce down to a 1/2" pipe fitting at the sprinkler head.

A:  The exact fitting will depend on what kind of pipe or riser you choose to use, but this sprinkler will connect to a 1/2" male-threaded fitting/riser. If you'd like us to walk you through the installation process, or if you have any questions at all, please feel free to contact our Support team at 1-800-488-6156. We'd be happy to help. Thanks!

A:  Depends on your water pressure and volume. I'm getting a solid 10-12', and I'm on a well.

A:  Carl, the brass nozzles have a 12 foot radius, so the water will spray 12 feet from the sprinkler head in all directions (24 foot diameter).

A:  They take a standard 1/2" threaded pipe fitting

A:  Fisherman, this sprinkler head has a 1/2", female-threaded inlet. If you have further questions, please feel free to contact our Support team at 1-800-488-6156 - we'd love to help in any way we can. Thanks!

A:  They are adjustable for a couple feet either way by turning the screw on top of the nozzle. Maybe a couple feet either direction is all you're going to get though.

A:  Yes it does. Thanks!

A:  You can. You will just want to make sure that the threaded fitting you're attaching to is the same as the threaded size of the sprinkler.