Questions and Answers for Orbit 2-Zone In-Ground 1/2 in. Sprinkler System with Hose Faucet Timer

A:  The 2 Zone has a Medium area coverage up to 1,250 sq ft depending on water pressure and flow.

A:  HDPE, High-Density Polyethylene

A:  Our Blu-Lock piping is made from polyethylene and requires no glue or plumbers tape, protecting the environment from harmful chemicals used with traditional PVC fittings.

A:  They are fully adjustable. In my setup, I have some spraying a full 360 degrees, and others spraying less than 180 degrees.

A:  That's a really small area. If I were you I'd just buy a one zone water timer and run a hose and sprinkler to it with the Melnor XT adjustable sprinkler. I use three of them to water 3 specific zones (with tight/weird spaces) with timers.

A:  I would not recommend adding pop-up spray heads to this kit. Sprays use a lot more water than the rotors that are included. You may not get enough water flow to pop up the heads.

A:  Looks like you have good flow. Check your PSI too. Here is an instruction from the manual that should help. This kit sues 1/2" Blu-Lock (HDPE) tubing and no PVC.

A:  Yes

A:  You need at least 40PSI with the smallest nozzles for this kit to work.

A:  You need a minimum of five GPM for this system to work. Good question, looks like a lot of reviews on here are confusing PSI for GPM. See the Step 1 instruction I included here.

A:  For winterization help, please contact our Orbit support team by phone at (800) 488-6156 or online at support.orbitonline.com.

A:  It should be self draining but I also blow it out with an air compressor with very low pressure like 25lbs.  I also disconnect the valve and store it in the garage.

A:  It comes with 2 sections of 125 feet of pipe so 250 feet total.

A:  The square feet this covers varies depending on the nozzle used and water PSI that is supplied. At 50PSI using the 3GPM nozzle, our Saturn III nozzles can spray a 25 foot radius.