Questions and Answers for Orbit 2-Zone In-Ground 1/2 in. Sprinkler System with Hose Faucet Timer

A:  Orbit offers a free landscape designing tool at design.orbitonline.com. If you have any questions on how to use this designer, we can be reached by phone at (800) 488-6156 or online at support.orbitonline.com.

A:  The minimum spray distance for the included Saturn III sprinklers is 15 ft.

A:  Everything goes in the ground expect for the timer.

A:  This is a do it yourself bundle. I'm sure any handyman could install it. My wife and I installed ours's in 2 days. We installed the 2 Orbit 2 zone for our front yard only with a combination of sprinkler heads.

A:  No, this is a DIY kit. I purchased two of them and setup in four zones in my front yard. I use beehyve controllers to automatically water my yard.

A:  Orbit does not employ technicians to install products, we recommend contacting a landscaper or an irrigation specialist.

A:  The 2 Zone has a Medium area coverage up to 1,250 sq ft depending on water pressure and flow.

A:  HDPE, High-Density Polyethylene

A:  Our Blu-Lock piping is made from polyethylene and requires no glue or plumbers tape, protecting the environment from harmful chemicals used with traditional PVC fittings.

A:  They are fully adjustable. In my setup, I have some spraying a full 360 degrees, and others spraying less than 180 degrees.

A:  That's a really small area. If I were you I'd just buy a one zone water timer and run a hose and sprinkler to it with the Melnor XT adjustable sprinkler. I use three of them to water 3 specific zones (with tight/weird spaces) with timers.

A:  I would not recommend adding pop-up spray heads to this kit. Sprays use a lot more water than the rotors that are included. You may not get enough water flow to pop up the heads.

A:  Looks like you have good flow. Check your PSI too. Here is an instruction from the manual that should help. This kit sues 1/2" Blu-Lock (HDPE) tubing and no PVC.

A:  Yes