Questions and Answers for Niagara Stealth 10 in. Rough-in 2-Piece 0.8 GPF Single Flush Round Front Toilet in White

A:  Hello lincoln, Many options should fit. You would need a round style seat, with hinge bolt centers spaced 5.5 inches apart. Should you have further comment or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.

A:  Hello Mary, The discharge outlet mounting centers is 4" above the finished floor. For floor mount, rear outlet siphonic toilets of this style, it is a standard height. Should you have further comment or need future assistance, please call Glacier Bay @ 1-855-434-5224 where one of our Customer Service Reps can assist you.

A:  This toilet is a rear exit toilet that mounts to the ground, but has the exit (drain) on the back. It uses “rear exit” gasket rings that are not made from wax.  The toilet does sit at the height of any other residential toilet I ever used if that’s what you mean by “standard height”. Hope this information was helpful. Blessings! 

A:  Hello JuneBug, The toilet can use either a 3in or 4in flange. The model you mention should work fine. Should you have further comment or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.

A:  Hello Amart, The measurement from the front of the tank to the seat hole centers is 1-1/2". Should you have further comment or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.

A:  Hello Nold, The interior of the tank has a vessel around he flush valve which aids in creating the vacuum for the flush. It is not like the compartments found in pressure-assisted toilet tanks. For more information, you can contact Customer Service at info@niagaracorp.com or call 1-800-831-8383 where one of our Representatives can assist you.

A:  Hello Anthony, The toilet will connect to a standard toilet flange, either 3" or 4", set into the wall. Floor to drain center measurement should be 4". Should you have further comment or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.

A:  Hello Monica, The base plate against the wall should have a width of around 9", centered on the drain. Should you have further comment or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.

A:  No this hole needs to be in the wall

A:  No this is a rear exit toilet.  Needs to hook up to an outlet or hole in the wall.  Designed to replace wall mounted toilets.

A:  Hello Floorman, The toilet has a rear discharge for a wall hook up. So a hole in the floor for drain is not needed.

A:  From center of bolt to back edge of base, 6". From center of bolt to wall, 9.5" Hope that helps.

A:  Hello Nold, This is a gravity flush toilet with vacuum-assist technology enhancing the flush. For the system to work correctly, you need to have the matching Stealth tank & bowl. Should you have further comment or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.