Questions and Answers for Niagara Stealth 10 in. Rough-in 2-Piece 0.8 GPF Single Flush Round Front Toilet in White

A:  Hello Sean, First lift the float arm to assure the valve will shut off. Occasionally during a toilet installation, some scale that has built up on the inside of the wall valve breaks loose & gets caught in the fill valve. This could cause it not to seal properly. Please follow the procedure in the instruction manual for cleaning the valve or call Customer Service at 1-800-831-8383 where one of the Representatives can assist you.

A:  NCCGB's answer does seem to be consistent with the pictures of the toilet. The pictures do not show a wall rear discharge.

A:  Hello Eyore, This model is a floor-mount with a rear outlet. Should you have further comments or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.

A:  Hello Valued Customer, The toilet meets or exceeds all industry standards for flush performance. Should you have further questions, comments or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.

A:  Hello Ting, The measurement from the back of the tank to the front of the bowl is about 27 inches. Thank you for advising the the incorrect dimension on the webpage. We are working with HD to correct. Should you have further comments or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.

A:  Hello Robert, The wall mounts of the bowl should be compatible. Though this toilet is a gravity-type toilet, not pressure-assist. The tank components are not compatible. Should you have further comments or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.

A:  Hello Benson, The base is 25-3/4" length x 10-1/4" wide. Should you have further comments or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.

A:  Hello RayD, The toilet is made to fit an outlet which center is measured 4" above the floor. Should you have further questions, comments or need future assistance, please call Glacier Bay @ 1-855-434-5224 where one of our Customer Service Reps can assist you.

A:  Hello Scott, Basically the same floor flange for the toilet would be mounted into the wall for installation. It is recommended to use either a neoprene-type seal or a felt reinforced wax ring to prevent any potential sagging. Should you have further comments or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.

A:  Hello Rrss, The toilet is supplied with a standard close seat. Should you have further comment or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.

A:  No, I bought a soft close seat for the toilet when I bought the toilet.

A:  Hello Saif, This model has the mounting point centers 4" above the floor, which should be the same measurement on the Briggs model. Should you have further comments or need future assistance, please call Customer Service @ 1-800-831-8383 where one of our Representatives can assist you.