Questions and Answers for Nantucket Pavers Patio-on-a-Pallet 10 ft. x 10 ft. Concrete Gray Basket weave Yorkstone Paver (37 Pieces/100 Sq. Ft)

A:  Many customers have used our products under hot tubs before. The correct installation method is recommended. Sand set installation, with compacted 3/8" crushed stone below the sand. As you lay pavers down you have to be sure there is no air voids below the pavers. The pavers need to be laid down in the sand and stone so that every section of the paver is fully supported underneath so there are no spaces below to allow for bending which would lead to breaking.

A:  You would need 12 of these pallets

A:  No cuts needed. Just use the two sizes provided and you can create the basketweave design

A:  Each full pallet weighs 1750 lbs

A:  these are not available for purchase..

A:  We do not recommend using the plate compactor on our products. Please review the installation instructions on our product page.

A:  You would need 3 pallets of this product that will give you 300 sq ft.

A:  These pavers react like a regular concrete walkway in the sun or heat. They have some raised arise on the blocks that may help with any slip resistance. If you are installing around a pool there is a grit that they sell to add to a sealer so you can add more grip near the wet areas of the pool near the ladders etc.

A:  The Basketweave patios consist of 12"x24" and 24"x24" blocks. Unfortunately they only allow one size to be added into the dimensions settings so it will not showcase both sizes in that spot but has them listed in the description of the item.

A:  They are 17 lbs per sq ft.