Q:I have a 2? id pvc pipe in my basement floor it was an old, standup shower drain will this cap fit inside The pipe and sit flush
by|Sep 20, 2023
1 Answer
Answer This Question
A: Thank you for your inquiry on the NIBCO 2 in. PVC DWV Hub Cap. This cap will fit over the piping and not on the inside of the pipe. NIBCO does not manufacture a plug or bushing for the inside or ID of PVC piping. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.
by|Sep 20, 2023
Q:What is the inside diameter of this 6 inch pvc cap?
by|Dec 26, 2020
1 Answer
Answer This Question
A: Thank you for your inquiry on the NIBCO 6 in. PVC DWV Hub Cap. The entrance of the hub is approximately 6.647 in. and the bottom of the hub is approximately 6.614 in. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.
by|Dec 28, 2020
Q:dimensions of hub cap
by|Oct 2, 2020
1 Answer
Answer This Question
A: Thank you for your inquiry on the NIBCO 1-1/2 in. PVC DWV Hub Cap. The dimensions are 0.9, 2.23 and 2.3. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.
by|Nov 24, 2021
Q:Is this a threaded cap?
by|Jun 5, 2020
2 Answers
Answer This Question
A: Thank you for your inquiry on the NIBCO 3 in. PVC DWV Hub Cap. No, this cap is a Hub or solvent glued. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.
by|Feb 6, 2021
1 found this answer helpful
A: No, that is not a threaded cap. It's made to blue to your pipe.
by|Feb 6, 2021
1 found this answer helpful
Q:Will this cap fit on a schedule 40 pvc 2 inch pipe?
by|May 12, 2020
1 Answer
Answer This Question
A: Thank you for your inquiry on the NIBCO 2 in. PVC DWV Hub Cap. Yes, this 2 in. DWV cap will fit on Sch 40 PVC piping. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.
by|May 14, 2020
Q:Do these have a rounded/curved or a flat top?
by|Apr 21, 2020
1 Answer
Answer This Question
A: Thank you for your inquiry on the NIBCO 2 in. PVC DWV Hub Cap.The cap is flat on top with round edges. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.
by|Apr 22, 2020
Q:how can it only hold 5 pounds like will it break
by|Mar 25, 2020
1 Answer
Answer This Question
A: Thank you for your inquiry on the NIBCO 2 in. PVC DWV Hub Cap. DWV fittings do not really hold a pressure rating as they are designed for drain, waste or vent (non-pressurized service). We believe the design pressure rating of DWV PVC is 1 BAR or 14.5 psi at sea level. If you are in need of fittings that are pressure rated, you should be look more towards Sch 40 or Sch 80 fittings, depending on what ratings you need for your application. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 5pm EST, by phone at (888) 446-4226.
by|Mar 26, 2020
Q:What is the inside diameter and the inside diameter? I'm not sure which on is 3" but I need both and they aren't listed in the specs.
by|Oct 1, 2019
3 Answers
Answer This Question
A: The outside diameter is 3.98 in. and the inside diameter the size is 3.5 in for this cap. It is for use with 3 inch pipes.
by|Feb 6, 2021
5 found this answer helpful
A: 3.500 is outside diameter 3.042 is the inside diameter on average
by|Jul 12, 2023
A: Thank you for your inquiry on the NIBCO 3 in. PVC DWV Hub Cap. The size of the 4817 DWV PVC cap outside diameter is 3.98 in. and the inside diameter the size is 3.5 in. If you have additional questions, you can reach a NIBCO Technical Services Advisor, M-F 8am - 6pm EST, by phone at (888) 446-4226.