A: Hello Bill - The MILWAUKEE® 5/16" Diamond MAX™ Hole Saw can be used with impact, drill/driving, and hammer drills when used in standard drilling mode. - Social Team
by|Apr 26, 2023
Q:Dose this bit work on porcelain tile on a vertical wall?
by|Mar 22, 2023
1 Answer
Answer This Question
A: Hi Mike - this hole saw is designed for use in Porcelain, Granite, Stone, Tile and Glass.
by|Sep 15, 2023
Q:Dose this bit work on porcelain tile on a vertical wall?
by|Mar 22, 2023
1 Answer
Answer This Question
A: Hi Mike - this hole saw is designed for use in Porcelain, Granite, Stone, Tile and Glass.
by|Mar 24, 2023
Q:Can this make a hole in plastic soda bottle?
by|Jan 21, 2023
1 Answer
Answer This Question
A: Yes it works on plastic
by|Feb 3, 2024
1 found this answer helpful
Q:I need to install 1/2-inch concrete anchors in the floor. The floor is high gloss porcelain tile. I have a 1/2-inch concrete masonry bit. Should I use this 1/2-inch diamond max to drill through the tile portion, then switch to the masonry bit to finish?
by|Nov 14, 2022
2 Answers
Answer This Question
A: Yes use the 1/2” diamond but for the tile, much smoother cut.
by|Nov 16, 2022
A: Yes, this should work. We used this for Granite and it worked well.
by|Nov 16, 2022
Q:How do you stop it rolling to the side when starting at a 45deg angle?
by|Aug 30, 2022
2 Answers
Answer This Question
A: start slow and dont put too much pressure on it untill it starts cutting
by|Dec 7, 2023
3 found this answer helpful
A: You need to make a jig out ou wood. Dill a hole in a board, at least 3/4" thick, on the angle and the same size as you want to drill with the diamond bit. Temporarily secure the jig to the surface to be drilled with clamps, hot melt, friction(stand on it)
by|Dec 26, 2023
4 found this answer helpful
Q:What is the maximum thickness countertop that this can drill through?
by|Jul 23, 2022
1 Answer
Answer This Question
A: The Milwaukee 3/4 in. Diamond Max Hole Saw maximum drilling depth is 0.5"
by|May 2, 2024
Q:Does The MILWAUKEE 1" Diamond MAX Hole Saw Model#: 49-56-0517 Sku#: 1000043525
Internet#: 204994414 also cut from the side of the bit? Just need to widen existing hole without cutting directly into thin frame comprising the hole.
by|Jul 18, 2022
1 Answer
Answer This Question
A: Hi MzShay! Wherever there is diamond coating you will be able to cut with it.
by|Jul 22, 2022
Q:will this work in wood thahks
by|Jul 11, 2022
2 Answers
Answer This Question
A: It will just burn wood. It is meant to cut ceramic with the use of water to keep it cool.
by|Jul 17, 2022
A: no it is for drilling into tile, stone and hard surfaces like that.
by|Jul 14, 2022
Q:Will this work on a resin lab table?
by|Jul 6, 2022
2 Answers
Answer This Question
A: I don't know I only use it on granite but it's a diamond tip so it should cut through it just make sure you use water
by|Jul 7, 2022
A: I’m not sure because I used this on a granite top which it was designed for it might work if the cutting edge doesn’t get too hot so as to smear resins on the cutter. I would think if you could spray a cooling water stream with some patience you will be successful