Questions and Answers for MetalTech 7 ft. L x 19 in. W Scaffolding Platform, Aluminum Work Platform and Scaffold Plank for Metaltech Scaffolding, 3-Pack

A:  Yep they're extruded. What alloy? Seriously? Let's pretend that wasn't asked. The planks work for standard mason scaffolding. Everybody calls them 7' planks. A 7' plank is the same length as any other 7' scaffolding plank. I have several brands picked up over the years waco, bill jax etc

A:  yes, they shoud.

A:  Do not hesitate to buy these planks. You will kiss the what ever? the price is right ,quality is there.

A:  It will fit a 5'x7' standard blue mason scaffold..The hooks are already on it. If your set up is 7ft from end to end it will fit..

A:  The hooks are made to set on the scaffold frames or outriggers, which are about 7'6" apart, so these will drop right in no problem. They are extruded aluminum attached to some addition framework to make them structurally rigid, as well as to make a place to attach the hooks. I have six of them and I like them very much, especially the feeling of safety over wooden planks.

A:  These are great if you need to leave them out in the weather. They are the litest available in a platform board, bit they do not lock to the scaffolding. I would opted for the platform boards with the plywood tops with a heavier frame and a locking device.

A:  absolutely will support over 800 lbs ea.

A:  yes it does

A:  I would not use these is I weighed as much as you, the ones with the plywood floor are much stronger, in my opinion, I have both and feel much safer on the plywood floor units especially when I'm twenty feet or higher

A:  Should be ok. Not sure tho. I weight about 220 and have had anther guy on at same time with no problems. Just watch the attaching clips.

A:  They are rated at 75 lbs per sq ft..I would lay out 2 platforms and throw a plank or 2 on top..Obviously you will have your feet displayed out which will displace your weight..Good Luck..Set them on a couple cement block and tramp on them..Much better then trying it 7 ft in the air..Good Luck.

A:  YES, RATING IS AT 250LB. THEY ARE MUCH LIGHTER THAN, ALUMINUM WOOD BOARDS. I AM 74 AND PAINT MY HOME, ALSO ERECT MY SCAFFOLD BY MYSELF. HOW IS THAT?

A:  NO. It has to be a 7'ft span..I have the blue mason 5'X7' and the aluminum catwalk / plank fit fine..I think yours is a 5 or 6 ft span. Try this .. How to Contact Us Scaffold Express makes contacting us simple and easy! Phone 800-592-1718 Email orders@scaffoldexpress.com

A:  yes, all 7foot planks

A:  Don't know what "Pro Series" you are referring to but these planks should work with any "standard sized" 5' x 7' scaffolding.

A:  the set of 3 are a great buy, light by a lot . you have to buy an part to fit your scaffold. good advice on the scaffold platforms.

A:  No

A:  The guardrail system you need for the exterior platform is model number: M-MGPUSL X 4, M-MGR7 X 4, M-MGR5 X4 , These is to be used with regular frames M-MF6060PS or M-MF6060PS-A. All model numbers are METALTECH part numbers. please visit our web site to learn more at www.metaltech.co

A:  these planks are standard to osha

A:  Everyone says USA but they come from Canada...

A:  Nearby

A:  USA

A:  USA

A:  If you look under Specifications it tells you what the capacity is.

A:  The MetalTech 7 foot aluminum plank is rated at 75 pounds per square foot and 750 pound maximum load capacity.

A:  They are rated for about 830 pounds. I am 200 pounds and they work very well for me.

A:  just over 800 lbs ea evenly distributed. If you do the math 75 lbs per sq ft. Same as most all planks.

A:  I weigh 220 lb, with tool load of about 75 lb. there is no problem. They are very light and are easy to move and load. I have original alum with 5/8" plywood, are more durable, yet 3 times as the pounds. r.

A:  Well I am 73 and carry two at a time. Saying they weigh about 20-30 lbs. my old platforms weigh 45 each,needless they stay on 1st-3rd stages. I say that is great and make my day. Enough info I hope.

A:  About one third the weight of this set of three.

A:  Approximately 30 pounds.

A:  Thanks Don your your question. Our 7 FT by 19 Inch aluminum platform weighs 27.5 LBS

A:  Each platform approximately weighs 27 lb.

A:  MetalTech Saferstack scaffold frames are built with perimeter tubes that are 1-5/8 in. (13-Gauge steel) and interior tubes measuring 1 in. (16-Gauge steel); pin spacing is 4 ft.

A:  Yes, they will fit.

A:  yes it does.

A:  Yes, they will. I measured the hook opening and it is a bit over two inches.

A:  Safway's 7 'X 19' aluminum platform looks a lot like our platform so it should be compatible. However, we have never tested this platform, so we can not guarantee that they are exactly alike. However, we know that our platforms can be installed on Safway frames. please contact our customer service directly for product drawing.

A:  Yes

A:  No side rails on these. Good quality, non slip surface.

A:  you betcha. Theyll fit.

A:  ?