Questions and Answers for Masterbuilt Electric Slow Smoker

A:  yes it is watch the video on their website

A:  Yes

A:  Thank you for your question. Our Slow Smoker is designed to attached to the wood chip loader tube on all of our electric smokers. So if your main unit has a chip loader opening on the side, then the Slow Smoker will attach to it. If you have any further questions be sure to let us know or let your local Home Depot Associate know! Thank you for choosing Masterbuilt!

A:  Yes

A:  Yes. Can be connected directly to the Masterbuilt 30. However, it can be remotely connected using 3, 3 inch vent ducting elbows, available from Home Depot. The remote connection allows for uneven surfaces, and allows for the smoke to cool, keeping the temperature down. This is very helpful when cold smoking cheese; 90 degrees and below.

A:  yes it is

A:  all

A:  30 inch, and 40 inch with bottom side receiver both work. I have both

A:  Thank you for your question. Our Slow Smoker will attach to almost every single one of our Electric models except for a couple. The Slow Smoker attaches via the Wood Chip Loader Tube hole on the unit, so if it has a Wood Chip Loader, the Slow Smoker will attach. The only thing you'll want to consider is the height of your main unit - if it is on a leg kit or stand, you'll want the Support Bracket for the Slow Smoker as well. We hope this was helpful to you. If you need further assistance, please call us at 800-489-1581 and one of our representatives can assist you!

A:  0.7

A:  Thank you for your question. The Slow Smoker has a 10A switch in it, therefore, the most it will draw from the circuit is 10amps when the element is on/heating. It is advisable to have a dedicated circuit for your smokers to avoid tripping breakers. If you need further assistance, please check with your local Home Depot Associate or call us @ 800-489-1581. We are available to you Monday-Friday, 8am-5pm.

A:  Thank you for your interest in Masterbuilt and our products! Our electric slow smoker is an attachment unit that is used in combination with one of our smoker units. Any of our smokers can fit and cook a brisket, it is just a matter of how much food you want to cook at one time. We offer a 30", 40", and a 44" size in both electric and propane. If you need further assistance, please check with your local Home Depot or call us directly at 800-489-1581. We are available Monday-Friday, 8am - 5pm EST.

A:  Brisket or any other meat won't fit . You need a smoker with it, in spite of what they call it , it's just a smoke generator.

A:  this is used to replace the small smoker chip tray to increase the smoke up to 6 hours not a smoker to cook in

A:  Without clarification I'm not sure how to answer this, but here goes a stab at it. 1. If you're asking if I like brisket, it's a YES! 2. If you're asking if the slow smoker works well attached to the Masterbuilt electric smoker when smoking a brisket, then, again it's a big YES!

A:  You cannot cook in this at all. This is an external smoker box for an existing smoker. Which means you have to have a smoker already. Has no real heat from this to cook anything. It's design to increase smoke to ur food, and reduce refilling chips as often. Also can be used for cold.smoke of foods. Which means like cheese veggies and such without heat

A:  Thick white smoke is not good smoke which is creosote laden and makes the meat smell like an ashtray. You need the near invisible smoke (thin blue smoke) prized by all BBQ enthusiasts. I finally figured out how to get it. I put in a small amount of wood chips and kept the chimney and top open. After 5 minutes, the wood stops giving off white smoking and catches fire. I replace the chimney cap and close the lid and viola - thin blue smoke. I did it 3 times - once every hour for good smoke penetration.

A:  Don't know if blue is the right color and it can be thick, which is good.

A:  Thank you for contacting Masterbuilt. The amount of smoke that your unit produces will vary depending on how you have it set up, in terms of the vent(s), the type/quality/dryness of the wood chips, the amount of water in the water pan, the temperature you've set it at, as well as the outside temperature. If you feel that your unit is not functioning properly or you are having issues, please first accept our apologies. If you would like to call in to our Customer Service Department with your model number and serial number, one of our knowledgeable agents can assist you in troubleshooting your smoker to make sure you're getting the most out of your purchase! Just call 1-800-489-1581 between 8am-5pm, Monday-Friday.

A:  Thank you for contacting Masterbuilt. We would happy to help you purchase a smoker that will best fit your needs and wants. We apologize for any confusion in the advertisement and/or video. If you have questions or want to make sure you get exactly what you are looking for, please contact our Customer Service Department and we can assist you further. Please dial 1-800-489-1581 between 8am and 5 pm EST.

A:  $51.00 is what I paid for the slow smoker. The photo is an accurate representation of the one I received.

A:  The purpose of the unit is to heat the wood until it emits smoke, which it does quite well

A:  Dear Customer, Thank you for your question. Masterbuilt would not recommend this but, should you wish to please Wood within the unit it can be warmed. The reason we do not recommend this as temperatures too high could cause the wood to ignite and start a fire when a fire is not desired nor is your unit designed for an open fire. Please refer to your product manual for proper use and instructions. Thank you

A:  Thank you for your question. Unfortunately, this is an accessory kit and the heating element is built inside the cabinet. If you are experiencing an issue with the heat please visit our service team at www.masterbuilt.com/support to get a proper resolution.

A:  Apparently you can't. Have been trying to contact masterbuilt, their support webform is not working, and they don't respond to email. I wastrying to get a different wood chip pan as mine doesn't contact the element well enough to produce smoke