Questions and Answers for MSI Henley Hexagon 12 in. x 12 in. Polished Marble Mesh-Mounted Mosaic Floor and Wall Tile (1 sq. ft. / each)

A:  Thank you for your interest in a MSI product. It is recommended to use a Latex modified thinset as an adhesive to Install these tiles. Good luck with your project.

A:  The same way you clean any other tile

A:  Thank you for your interest in a MSI product. Please see the following link to know about use and care instructions for this material, https://images.homedepot-static.com/catalog/pdfImages/d8/d899cab4-f197-4386-b17e-0c0e867111e5.pdf For more information, please contact a professional installer to check on the maintainability and suitability of this product for your project

A:  Warm water & Mild dish soap

A:  This product is all ready sealed. You would only how to seal the grout

A:  Thank you for your interest in a MSI product. Henley Hexagon 12 in. x 12 in. x 10mm Natural Marble Mesh-Mounted Mosaic Floor and Wall Tile should be sealed with a penetrating sealer. Good luck with your project.

A:  My installer put some sort of stone sealant (I think 511 penetration sealant) on it before he grouted it and said to do it again in a year. https://www.homedepot.com/p/Miracle-Sealants-32-oz-Impregnator-Penetrating-Sealer-511QT6D/100076375

A:  Thank you for your interest in the MSI Henley Hexagon Natural Marble Mesh Mosaic Tile. This tile can be installed using unmodified thinset. Good luck with your project!

A:  Modified will gave a better grip to hold tiles in place. In- modified will cause the tile to loosen after normal use

A:  Thank you for your interest in the MSI Henley Hexagon Mosaic Tile. Due to the nature of this product at times the color may vary. Please contact your local Home Depot Customer Service to see what options are available to you. Best of luck on your project!

A:  Make sure the box have the same production date on it

A:  Thank you for your inquiry on the MSI Henley Hexagon Mosaic Tile. This tile should work well for your shower floor but since it is only marginally skid resistant we recommend that you obtain a sample to ensure that the tile will be up to your standard when wet. Let us know if you have any other questions on our products. Best of luck on your project!

A:  Absolutely. This mosaic is cut thick and from natural stone. Therefore completely acceptable for use on a floor or shower floor.

A:  Yes, it can be used in a shower but it does require sealing.

A:  We had this installed on our shower floor last year and it looks great and we have had no issues It was not sealed but a special grout was used that requires no sealer.

A:  THIS PRODUCT COULD BE USED FOR BOTH WALL OR FLOOR HOWEVER IT IS REALLY DESIGNED FOR THE FLOOR AS IT HAS A UNIQUE ANTI SLIP PROPERTIES MAYBE NOT NEEDED SO MUCH FOR A WALL TILE. ALSO AS A WALL TILE IT DOES NOT HAVE A SHINY FINISH.

A:  Yes

A:  Yes, it lays in smoothly with the floor, grouting completes the smoothness

A:  No, it can be used on the shower wall, but not the floor.

A:  Thank you for your interest in a MSI product and your question. Yes, this is a natural stone and it is recommended that the tile be sealed before and after installation. Please contact your closest Home Depot customer service or call at 1-800-466-3337 for further assistance. Good luck on your project.

A:  Yes. The combination of smooth and rough creates a safety measure for not slipping and falling in the shower. Plus, looks great.

A:  Tile saw is the way to go. You could try to manually cut them but they are extremely thick and would like take far too long. Its easy, but a tile saw will do the trick. I had to cut mine in a circular edge and it was tough.

A:  A good tile wet saw

A:  I used a box cutter. Just be sure you cut away from your body and no one is around you.

A:  Thank you for your question. In general, Henley Hexagon 12 in. x 12 in. x 10 mm Natural Marble Mesh-Mounted Mosaic Floor and Wall Tile can be cut using a wet saw by placing a solid surface(may be a 12x12 tile) underneath the mosaic, this way the wedge of the wet saw does not affect the cutting.