Questions and Answers for Glasliner 4 ft. x 8 ft. White .090 FRP Wall Board

A:  Hello Mike, We technically only recommend these panels to be used on vertical wall applications. The weight and flexibility of the panel makes it difficult to install on a ceiling. If you do use it on a ceiling, make sure you have a sturdy backer like plywood, osb, or drywall. We also suggest using our nylon rivets in addition to FRP adhesive for the best hold. The rivets help hold it securely in place until the glue dries. Hope that helps! Thank you, -Stabilit America

A:  Hello Alice, No, the standard FRP sold in stores is a class-C general purpose panel. Our fire rated, class-A panels are available through Home Depot's special-order program. Talk to an in-store rep for more help. Data sheets and brochures can be found on our website www.stabilitamerica.com/downlads Thank you, -Stabilit America

A:  Hello Fred, The finish is designed to be a non‐adherable surface. If painting is necessary, a high-quality epoxy or acrylic‐based paint is suggested. Thanks, -Stabilit America

A:  Yes I am putting on a whole building as siding. It’s 1100 sq feet and it works. I had my boards in the Sun and weather for over a year before using it and it’s still bright white! Don’t be afraid just because they say “interior”

A:  Hello Charlie, No, all FRP products sold through Home Depot are for interior use only. The panels do not have a UV treating and will yellow and crack if exposed to sunlight for long periods of time. -Stabilit America

A:  Hello Wall, please contact your local Home Depot store or customer service to clear items in your cart. Thank you, Stabilit America

A:  Hello Fred, Yes, You can use nylon rivets (sold in store next to the panels) for installing the panels. Be sure to predrill the holes for the rivets. The recommended way to install is to use FRP adhesive. Thank you, -Stabilit America

A:  de[ends , if you want for a shower or any wet place , I say not ,

A:  Hello Kris, The finish is designed to be a non‐adherable surface. If painting is necessary, a high-quality epoxy or acrylic‐based paint is suggested. Thanks, -Stabilit America

A:  Yes , but you need a special primer

A:  Hello Wonder, To keep it as clean as possible, we recommend washing the panels with a light detergent. The panels may also be cleaned with steam, high pressure sprayers, or soap and water. We strongly advise against using abrasive cleaners on panels to avoid scratching or scraping the surface. Hope this helps! -Stabilit America

A:  home depot has something like goo off