Q:Have a Hampton model HWH36D vanity . Will these be a replacement for the drawer slide . There are two drawers on the right side and the bottom one is defective .
by|Nov 10, 2016
1 Answer
Answer This Question
A: According to the instructions on that vanity it looks like they use ball bearing slides similar to our D806, not roller slides like these. Unfortunately they do not specify a length, size or supporting hardware. Glacier Bay (a Home Depot brand) may be able to provide more information.
by|May 4, 2023
1 found this answer helpful
Q:the shelves will be 11 3/4" deep so I need to know if these are 18" fully closed.
by|Sep 30, 2016
3 Answers
Answer This Question
A: Fully closed these slides are 450mm, about 17.62 inches or 17 and 23/32”
by|May 4, 2023
A: as long as you have both sides to install upon, the job should work. But I recommend you use real wood for strength.
by|May 5, 2023
A: you can cut them to length if you buy longer than needed. If unsure measure length needed to close drawer(from drawer end to inside face of drawer). Also video installation tips on youtube and on this site under european drawer slide.(see http://www.homedepot.com/p/Liberty-22-in-Self-Closing-Bottom-Mount-Drawer-Slide-1-Pair-D68822C-W-TS/202200640)
by|May 4, 2023
Q:Does the white paint on the Euro Slide contain lead?
by|Jan 25, 2016
3 Answers
Answer This Question
A: No, the paint does not contain lead.
by|May 3, 2023
1 found this answer helpful
A: They are powder coated, which is an industrial painting process that does not involve lead and is tougher than normal paint.
by|May 3, 2023
1 found this answer helpful
A: No lead paint used in the US (legally) since 1978
by|May 4, 2023
3 found this answer helpful
Q:did not find this info.....................
by|Oct 28, 2015
1 Answer
Answer This Question
A: The weight capacity per set is 75 lbs. I hope this is helpful. Kind Regards, emccollum
by|May 3, 2023
3 found this answer helpful
Q:Where are these made?
by|Sep 3, 2013
4 Answers
Answer This Question
A: Made in China-good quality
by|Mar 2, 2020
A: These are made in China.
by|May 2, 2023
1 found this answer helpful
A: Ya know, I'm not sure. I already threw away the paperwork but I think the U.S.
by|Feb 4, 2020
A: The package says China
by|Jul 19, 2020
Q:The opening for the drawer is 20". The drawer is 19-5/8" wide
by|Oct 25, 2012
5 Answers
Answer This Question
A: the minimum required is 1/4", so if you have 3/16" on both sides, you should be OK
by|May 5, 2023
A: Not what you want to hear, but I believe that you need 1/2" on either side. Drawer width in your case should be 19". Perhaps you can consider a bottom mount slide.
by|May 2, 2023
2 found this answer helpful
A: There is a 1/2" Clearance required on each side for this drawer slide.
by|May 2, 2023
2 found this answer helpful
A: 1/8
by|May 9, 2020
A: Each kit is a little different. You would need to open the install instructions on this model to tell. To see a similar model video that gives reference to the clearance refer to : http://www.homedepot.com/p/Liberty-22-in-Self-Closing-Bottom-Mount-Drawer-Slide-1-Pair-D68822C-W-TS/202200640