Q:Can I drill smalls holes in it in order to mount to drywall, connecting to the studs with small diameter wood screws?
by|Nov 25, 2023
1 Answer
Answer This Question
A: Yes, this can be attached to the wall with screws if preferred. keep in mind, the openigg to get the cord in is not hinged like it is on Cordmate II and III, so it may be a little difficult to get inside.
by|Nov 27, 2023
Q:Will this stick to brickwork on an enclosed patio?
by|Oct 23, 2023
1 Answer
Answer This Question
A: Hi,
This product is only meant for use in indoor dry locations and for mounting on smooth surfaces.
Thanks,
by|Oct 23, 2023
Q:Can this cord concealer be used on an outside
Cord?
by|Sep 4, 2023
1 Answer
Answer This Question
A: The CordMate is rated for indoor dry locations only.
by|Sep 5, 2023
Q:What is the maximum cable size you can use
by|May 28, 2023
1 Answer
Answer This Question
A: Hello,
Cordmate is a great solution for concealing phone wires, lamp and extension cords The channel can comfortably conceal a cord having a .25" outside diameter.
Thank you!
by|May 30, 2023
Q:How do you insert wire into cover? Does it open and just place the wire inside?
by|May 11, 2023
1 Answer
Answer This Question
A: Hello. One cord or cable will fit through the latch opening which runs the length of the channel. Thank you.
by|Feb 9, 2024
1 found this answer helpful
Q:Do they come in black?
by|Dec 30, 2022
1 Answer
Answer This Question
A: Bob,
They do not come in black but can be painted. To paint a plastic raceway apply primer and then paint using only latex-based paint. Even though primer is not a necessary element when painting plastic raceways, better results are achieved when using it.
Thanks,
by|Dec 30, 2022
Q:How large is the tubing? Can you fit multiple cords inside one tubing?
by|Oct 17, 2022
2 Answers
Answer This Question
A: Hmmmmm.......you shouldn't........but I did, and it was heavier than sticking substance would allow, as such it fell off the wall frequently.
I forced to flat monoprice speaker wires inside.
Ultimately I had to tear it down and get a bigger product.
by|May 29, 2023
2 found this answer helpful
A: The channel is 9/16" x 7/16" and is designed to fit one cord or cable. Please refer to the images for more detail.
by|Feb 17, 2023
1 found this answer helpful
Q:Is it easy to cut?
by|Sep 13, 2022
3 Answers
Answer This Question
A: Yes, the CordMate can be cut with PVC cutters or a hacksaw. Thank you
by|Feb 17, 2023
1 found this answer helpful
A: yes, with a hacksaw blade.
by|Sep 17, 2022
A: Absolutely! I cut it with utility knife. But you could use hack saw, pvc pipe cutter etc. Very easy to trim.