Questions and Answers for Kerr Lighting 14-Light Outdoor Paver Light Kit

A:  No, you cannot replace the bulb with LED.

A:  They now sell the LED bulb: https://shop.tjb-inc.com/12-volt-acdc-dauer-t5-wedge-led-with-20-smd-5050-ww-flat-chip-diodes---26-watt---5-year-warranty-p2072.aspx?Thread=True

A:  The plastic boxes are easily removed (depending on your installation). Also the bulbs are easy to replace.

A:  Bulbs are replaceable.

A:  Light bulbs can be replaced. The base can be, but also can be difficult to remove, especially if sealed in with paver joint sand that bonds and holds pavers and base in place. Base can be removed but might be damaged. Varies depending on installation method, age, etc.

A:  "light vehicular traffic" manufacturer states. Depends on how well they're installed, level or slightly below surrounding surface on smooth sand bed, lights can be driven over. Parking and or turning on the light can cause breakage. They are 'strong resin fixtures' and lenses.

A:  Yes you can drive over these lights

A:  Yes

A:  Probably not. They are too big. There are smaller lights that can be put in a driveway and I would use those.

A:  I expect so, but you will need to do a lot of cutting of pavers. Plan on a wet saw to start with. The routing of the wires will be challenging, but it should work fine.

A:  Yes, they can be used in a step.

A:  No

A:  Not easily. You might be able to put some sort of color filter or gel under the cover, but nothing is made for this application. Changing the LEDs would be challenging at least.

A:  Yes

A:  Yes, but be sure to drill holes in the bottoms as they aren’t water proof and no drainage.

A:  if they are installed correctly, you can drive over and wont break.

A:  "light vehicular traffic" is stated by manufacturer, so likely they will not withstand repeated driving on.

A:  Yes you can drivr on them

A:  I installed 8 lights in my driveway about 6 years ago, 2 are cracked - I assume from being driven on. I also have had continual issues with dirt and insects getting inside.

A:  Thank you for your recent inquiry with The Home Depot. We are not seeing the plastic tops only for sale on our website. We do see the manufacture customer service number would be ( 630-762-0606) You can gladly contact them to see if there able to get the part for you We apologize for the set back .We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.

A:  Contact the manufacturer

A:  Either try Home Depot Customer Service or, Accessory and replacement parts, including lenses and colored bulbs, are available. Please contact your local supplier or call Kerr Lighting Customer Service at (800) 932-3343 for more information. See Installation Guide in the Info & Guides section for all the lighting info.

A:  I asked that to the manufacturer but they suggested not to try LED as it doesnt spread the light in the box. they have tested it

A:  There is number on web site www.kerr lighting .com please go the website.

A:  I will suggest look for othe options