A: Hi Dami, this is Sarah with Kohler Customer Service. I'm glad to address your question. The diameter of the wall plate is 2-3/8". Thank you for choosing Kohler.
by|Aug 26, 2020
Q:plate diameter
by|Aug 24, 2020
2 Answers
Answer This Question
A: Hi Damian, this is Sarah with Kohler Customer Service. I'm glad to address your question. The diameter of the mounting skirt on this product measures 2-3/8" in diameter. Thank you for choosing Kohler.
by|Aug 24, 2020
A: 2 1/2 inch diameter of plate
by|Aug 25, 2020
Q:how far out does the bracket extend?
by|Sep 6, 2019
5 Answers
Answer This Question
A: It extends out about 2.25 inches from the wall.
by|Oct 7, 2020
A: Hello Babes, my name is Kassi with Kohler Co. I'd be glad to answer your question. The mounting bracket extends 2-15/16" from the wall. Thank you for choosing KOHLER.
by|Sep 8, 2019
A: It projects 3".
by|Sep 8, 2019
A: 3 inches but the towel ring swivels from the base. Straight down it hangs at 3 inches. Straight out it’s about 10 inches out but I don’t know why anyone would use it that way.
by|Sep 7, 2019
A: It will extend to 189 degrees from wall if needed. Otherwise, in the down position 4 to 6 inches.
by|Jul 30, 2020
Q:This rowel ring came with wall plate stuck in it already. I am scared to break it, how is it removed so I may install?
by|Jan 20, 2019
3 Answers
Answer This Question
A: There is a small screw on the main attachment just under the ring. You would use this to loosen the screw to remove the plate. This is also what you tighten once it's back on the wall plate.
by|Jan 24, 2019
A: Hi, this is Laura with Kohler Co. I am happy to assist you with your question. Loosen the setscrew on the underside of the post to remove the post from the installation bracket. Thank you for choosing KOHLER.
by|Jan 20, 2019
A: There's a tiny little screw in the bottom of the base, right near the ring, unscrew it a little and it should come apart.
by|Jan 20, 2019
Q:What is the size from top to bottom?
by|Jan 16, 2019
1 Answer
Answer This Question
A: Hello, my name is Sarah with Kohler Co. I'm glad to answer your question. The dimension from the bottom of the ring to the center of the attachment bonnet is 7-1/2". Thank you for choosing KOHLER.
by|Jan 17, 2019
Q:What is distance between centers on installation plate? Also, is installation plate mounted horizontally or vertically?
by|Dec 7, 2018
1 Answer
Answer This Question
A: Hi, this is Laura with Kohler Co. I am happy to assist you with your question. The holes in the installation plate are 1.26" on center and are vertically aligned. Thank you for choosing KOHLER.
by|Dec 9, 2018
Q:How big is the towel ring. I have 6.25" between medicine cabinet trims. Will this fit that spot?
by|Jul 10, 2017
4 Answers
Answer This Question
A: No. It measures 7 1/2" at the widest point.
by|Sep 8, 2019
A: No.
by|May 5, 2023
A: Hi Lou, my name is Sarah with Kohler Co. I am glad to answer your question. Unfortunately, this would not fit. The width of the ring is 7-1/2". Thank you for choosing KOHLER.
by|May 4, 2023
1 found this answer helpful
A: No. It measures about 7.75" from side-to-side. I don't think it will fit your space. Too bad. It's really a nice ring.
Good luck.
by|May 5, 2023
Q:How far does this stick out from the wall?
by|May 10, 2017
3 Answers
Answer This Question
A: Mount is flush to wall. It only extends as pictured.
by|May 5, 2023
A: acwtim, my name is Jessica with Kohler Customer Service. I am happy to assist with your inquiry. K-10557-2BZ comes out 2 15/16" from the wall. Thank you for choosing KOHLER.