Questions and Answers for IDEAL SECURITY Wireless Safety Alert

A:  Yes. The add-on motion sensor part number is SK602-1 (color white) and SK602-1G (color charcoal grey). You can order them direct on idealinc.com.

A:  Sorry for the confusion. YES. Additional sensors CAN be added. The model number for additional sensors is SK602-1

A:  IVE HAD THIS PROGRAM FOR 2 YEARS IT WORKS GREAT COMBINE A SIGHN AND THEY STAY AWAY

A:  You need new batteries. Please visit our website to read the instruction.

A:  You need new alkaline batteries. Check out a full instruction on idealinc.com under SK602.

A:  The SK602 is a standalone system, we called it QH series. it is not compatible with the SK6 series. You can buy sensor SK602-1 or SK602-1G and link to the receiver in the kit of SK602 or SK602G.

A:  Only the one sensor that comes with the receiver can be used. The sensor and receiver were given a unique code at time of manufacture that cannot be changed. If you need a second sensor, the only thing to do is buy another sensor and receiver set.

A:  This particular model is not compatible with additional sensors. You would need the IDEAL Security SK698 starter kit.

A:  Yes you can I have 3 sensors and one alarm works fine but you dont know which sensor was set off

A:  The SK602 starter kit *CAN* be expanded with additional SK602-1 sensors. Both colors are interoperable if you want to mix and match. Thank you for pointing this out! You're absolutely right, the system was upgraded and we haven't update the description here. We're working on that right now. Sorry for the confusion, and thank you for your help!

A:  There is a switch to select the sounds: chime, low (chime), alarm. And another switch to choose from: sound & light, sound only, light only. Check out the full instruction on our website.

A:  It is not a "ring", but it can be set to "chime", with an adjustment of "high" or "low".

A:  No way to change the dound.

A:  Yes. There is a switch on the right side of the receiver that allows you to select either 'alarm' mode (a continuous loud siren) or 'chime' mode (a 'ding dong' type of ring). In addition, there is a switch on the left side that selects the loudness of the ring - either 'hi' or 'low'.

A:  What is the model #? What is item #93068?

A:  Yes! our system is work very well. no problems yet.

A:  MINE WORKS GREAT IT WENT OFF ONE NIGHT I DICOVERED A FOOL TRYING TO STEAL MY BIKE IVE GOT A 3RD DEGREE BLACK BELT NEEDLESS TO SAY WHEN THE POLICE ARRIVED HE WAS VERY SUBDUDE

A:  You can press a button on the left side (middle one) to choose the alert mode: sound, light, sound & light. Check out the instruction included or go to our website to find out more under model SK602.

A:  Relocate it. Something is triggering it. I've had problems with wind, trees, and grass believe it or not.

A:  The alarm will last for about 25 seconds once motion is detected. If the alarm didn't stop, then there is still movement, or the battery power is low in the sensor.

A:  The volume level can be adjusted. It is located on the unit itself.

A:  No, there is no volume control on the chime.

A:  It's 180 ft line of sight.

A:  The range between sensor and receiver is 180 ft.

A:  They should be on different RF channels. The channel number is written on the bottom of the receiver and sensor. You can read it by lift the package up without unpacking. So make sure all three packages are on different channels.

A:  It depends. The units have a finite number of fixed channels or frequencies. My transmitter/receiver pair are labeled 'CH13'. I ordered it online, but there was no selection in the order selection page for requesting specific channels. You might consider shopping in store, where you can inspect the channel frequency of each unit that you purchase.

A:  They will not interfere with each other because the signals are encrypted.