Q:If 18.5" is the width at the base where it is MOST NARROW, per Hydrosystem's previous answer,
What is the width measurement at the base where it is WIDEST?
by|Sep 9, 2020
1 Answer
Answer This Question
A: The base of the tub is the narrowest section and it remains 18" wide from drain end to the backrest.
by|Sep 10, 2020
Q:Confirmation of basin width needed
by|Aug 21, 2020
2 Answers
Answer This Question
A: The basin width is 18.5". The basin width is the narrowest the tub width gets at bottom of inside of tub.
by|Aug 24, 2020
A: wall to wall it is 31 inside wall to wall
it is 26
by|Aug 21, 2020
Q:Width confirmation needed
by|Aug 21, 2020
1 Answer
Answer This Question
A: That is correct, the basin width is 18.5". The basin width is the narrowest the tub width gets.
by|Aug 24, 2020
Q:Is the basin length measured from the floor of the tub, or the top to include the slant?
by|Aug 2, 2020
1 Answer
Answer This Question
A: The basin length just measures floor length of tub, does not include slant on back rest.
by|Aug 2, 2020
Q:What drain system would you order for this tub and does it get attached to the tub at your factory?
by|Jul 18, 2020
2 Answers
Answer This Question
A: I just bought the regular drain and no it is not installed at the factory.I think i bought the one that they suggested in the description.
by|Jul 19, 2020
A: The answer I got previously stated they don't attach the overflow valve at the factory but when you read the description on the overflow valve out states "Not a standalone item, this unit is attached to bathtub during production. Must purchase eligible bathtub for this upgrade.
Not a standalone item; the integral waste and overflow is permanently attached to your bathtub during production" ???
by|Jul 20, 2020
Q:Product description says "Must order drain separately for this model." I can't find info on the product brochure about ordering the drain. What drain do I need to get? Is it available in the store?
Please advise.
by|Jun 25, 2020
1 Answer
Answer This Question
A: Sorry for any confusion. You want to order one of our 27 inch cable waste and overflows from the Home Depot website. They come in a variety of finishes. Polished Chrome (item# 312409381), Brushed Nickel (item# 312409450), Satin Nickel (item# 312409505), or Oil Rubbed Bronze (item# 312409561).
by|Jun 29, 2020
Q:What is the recommended tub drain that will fit this deep soaker tub?
by|May 8, 2020
1 Answer
Answer This Question
A: You want to order one of our 27 inch cable waste and overflows which will fit this tub. They come in a variety of finishes. Polished Chrome (item# 312409381), Brushed Nickel (item# 312409450), Satin Nickel (item# 312409505), or Oil Rubbed Bronze (item# 312409561).
by|May 8, 2020
Q:Can I tile the side of this tub to the floor?
by|May 2, 2020
1 Answer
Answer This Question
A: You could tile the skirt if you choose but we would not recommend it.
by|May 4, 2020
Q:What is the lumbar angle of this tub?
by|Apr 14, 2020
1 Answer
Answer This Question
A: The Back slope on this tub is at 33 degrees.
by|Apr 14, 2020
Q:Could I fill in all 5 sides, all 4 sides and underneath with closed cell insulation, or do I definitely need the slow curing mortar as your video said?
by|Feb 22, 2020
1 Answer
Answer This Question
A: For proper installation and not voiding your warranty you should stick with the mortar as illustrated in the installation video.