Questions and Answers for Husky SAE Short Arm Hex Key Set (10-Piece)

A:  Tye, This could be an oil used in the manufacturing process or a lubrication used for rust prevention.

A:  Michi, This is greatly dependent on the maker of your bike and when it was made. Most bikes use Metirc fasteners, and the 13 piece Metric set should cover what you need for most bike modles https://www.homedepot.com/p/Husky-Metric-Long-Arm-Hex-Key-Set-13-Piece-HLAHKM13PC/202934894

A:  used it for door

A:  Shopper, This set comes with a 3/32" key with would convert to 2.38 mm. 3/32 is the only key that would fall between 2 and 2.5 mm.

A:  This set is not metric.. The range is from 1/16 to 1/4", by increments of 1/32"

A:  As listed in the product description, the included sizes are "Set includes 10 SAE keys covering sizes 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 in." I hope this helps!

A:  Hey Susana, This set contains 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 in Thanks!

A:  They pull out. You might have to rotate some of the larger ones if you want a smaller or middle one. I hope this helps!

A:  Easy pull Up the exs from te holder

A:  Open package and they slide right out.

A:  I put little tags on mine that tell me what size they are and said the heck with the holder

A:  Twist the small end away from the rest, and then pull strieght up.

A:  Jennie, They will pull out towards the top. They may be slight snug at first, but there is no trick to this case.

A:  Took less than an hour to be ready.

A:  Depends on where it's coming from

A:  The short answer is not much... There's a great explanation on Home Depot's website. If you go to the Home Depot community site, community.homedepot.com and search for SAE and Metric Tools, it will tell you about the details of the two. I hope this helps!

A:  Di, SAE tool sizes are expressed as fractions of inches (1/4”, 9/16”, ¾”…) and will fit what’s commonly referred to as standard/imperial nuts and bolts. Metric tool sizes are expressed as units of meters (10mm, 12mm, 15mm…) and will fit nuts and bolts designed with the metric system in mind.

A:  SAE is American sized, anything you by made inside the USA, metric is for stuff made outside the USA.

A:  Valerie, this caddy is made of plastic, and printed with the sizes of each key. The caddy is black for SAE, or gray for metric. The keys are held in place with friction so the caddy will wear over time allowing the keys to slide in and out more freely, but this set will last you for years to come.

A:  Caddy is made out of rubber.

A:  It is a very nice HEAVY PLASTIC caddy that keeps them neat and in order. This was my concern as well, but i LIKE what I received and how it works