Questions and Answers for Husky 1/2 in. Drive Deep SAE Socket Set (11-Piece)

A:  Hey Jim, Set includes (10) 3/8 in. drive 6-point deep sockets: Metric - 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm Thanks!

A:  Hey Jay, It includes both SAE and Metric. Thanks!

A:  Hi Jeff, these sockets are designed to exceed ANSI specs for torque and strength.

A:  Yes, if you get a 3/8 socket adapter. Use caution, these are not impact sockets. Other than that, no problem.

A:  Yes they can. These sockets are not “impact” rated, but should hold up in most cases. You will need to get a 3/8” drill adapter (about $3. to 4.).

A:  Hi Gerald, these can be used with a drill, however they are not impact grade.

A:  If you have a hex shank to 3/8" square drive adapter, sure. They are 3/8" square drive. They will work on anything with 3/8" square drive.

A:  You will need to buy a 3/8” nut driver like this one and maybe a Quick change chuck. https://www.homedepot.com/p/Milwaukee-Shockwave-3-8-in-x-1-7-8-in-Magnetic-Nut-Driver-49-66-4505/203114970?cm_mmc=Shopping%7CG%7CBase%7CD29A%7CMulti%7CNA%7CPLA%7CMajor-Appliances%7CSpecial-Buys%7C71700000032418849%7C58700003842365800%7C92700030987191770&gclid=EAIaIQobChMIvO-t2IK73gIVhLrACh37pQF4EAQYASABEgLPgPD_BwE&gclsrc=aw.ds

A:  Yes, all you need to get a is a 3/8 drive bit. Works in regular drill or impact drill.

A:  This socket set has six faces. The walls are stronger than those of 12 faces,

A:  Yes they can, but there is a risk of shattering a socket in the process so do be careful, I highly recommend using impact sockets the black ones they will hold up better

A:  No. They "sit" on a base, but easily fall off.

A:  These sockets come in a tray. A great buy.

A:  Yes, comes with a tray.

A:  They come on a plastic stick with knobs to fit into the ratchet end of the sockets. Works alright, but not too long-lasting, or I don't think it will be.

A:  No case or container, but it does have a plastic stick with knobs that fit into the ratchet end of the socket to keep them together. Handy, but I don't think it is made for the rough and tumble of a pro, but should be fine for the DIY'er.

A:  2 13/16"

A:  Hi Lazaro, these sockets are approx. 2.5 in. long.

A:  The Length on each socket is 2.5 inches

A:  Approx 3.5”

A:  About 2 inches deep

A:  Yes.

A:  Not safely. Chrome sockets are thinner walled than impact sockets and are typically made from chrome vanadium which will shatter. This is especially true in 1/4. They will however work safely with a non-impact electric or air tool like a ratchet, screw gun, or drill (put your square drive hex adapter in the chuck). Why take a chance? Buy a cheap set of real impact sockets and go to town.

A:  Yes, but not for long. Impact sockets have thicker walls and are specifically designed to withstand the high torque and rapid hammering of impact drivers. I'd suggest purchasing the impact socket set. They'll last much longer.

A:  Hi Robb, it is not recommended to use these sockets on an impact driver. We would recommend using impact sockets with an impact driver.

A:  These are not designed for a true 'impact' use. Impact sockets are generally a thick wall.

A:  Robbie, this set includes (10) 1/4 in. drive 6-point deep sockets: Metric - 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm

A:  4 mm thru 13 mm.

A:  4, 5, 6, 7, 8, 9, 10, 11, 12, 13 mm

A:  I think they are 3/16 thru 9/16, I know for sure that it goes up to 1/2, but I'd have to go out to my truck to verify the 9/16 socket.

A:  4mm thru 13mm, 1/4" drive.

A:  No.

A:  Yes, made in USA

A:  YES

A:  Ken, this socket set is manufactured in our facility in China. Each socket exceeds all applicable ANSI (American National Scientific Institute) specifications for strength and torque. These sockets are also backed by Husky's Lifetime Warranty.

A:  Irish, this set includes (11) 1/2 in. drive 12-point deep sockets: Metric - 10, 11, 12, 13, 14, 15, 17, 18, 19, 21, 22 mm

A:  This is a metric socket set consisting of 10, 11, 12, 13, 14, 15, 17, 18, 19, 21, 22 mm sockets.

A:  10 - 22 mms. There is no 16 or 20mm socket in the set

A:  3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in as listed in the descripton