#1 Home Improvement Retailer

Cart

Cart

Home
Tools
Hand Tools
Ratchets & Sockets
Ratchets

Questions and Answers for Husky 1/4 in. Drive Round Head Ratchet

Internet #202923411

Model #H14RHRAT

Store SKU #106791

1/4 in. Drive Round Head Ratchet
(485)Questions & Answers (14)
  • Strong 45-tooth ratchet allows for greater torque to be applied
  • Ergonomic design provides comfort when applying high torque
  • Full polish chrome finish easily wipes clean of oil and dirt
View Full Product Details

Questions & Answers

14Questions
caret
Q:Are these being discontinued? If so, how can I warranty?
by|Jan 31, 2023
1 Answer
Answer This Question

A:  KF, Yes these are being discontinued from the Husky line of tools. If needed, would warrant this with a like ratchet of equal or greater value. Please give us a call at 1-888-HD-HUSKY, Option 2.

by|Jan 31, 2023
    caret
    Q:socket for water heater element
    by|May 20, 2022
    3 Answers
    Answer This Question

    A:  https://www.homedepot.com/p/Husky-1-2-in-Drive-Deep-1-1-16-in-Socket-12-Point-H2D12PDP1I116/301175090

    by|May 22, 2022

      A:  1-1/16”, husky brand works  https://www.homedepot.com/p/Husky-1-2-in-Drive-Deep-1-1-16-in-Socket-12-Point-H2D12PDP1I116/301175090

      by|May 22, 2022

        A:  Calvin, most residential heating elements have a 1-1/2 inch hex end on them.

        by|May 21, 2022
          caret
          Q:Is there a rebuild kit for it. I just need the retaining clip.
          by|Jan 28, 2022
          1 Answer
          Answer This Question

          A:  Boooo, No, we do not offer a rebuild kit for this ratchet. It is covered under our Lifetime Warranty program.

          by|Jan 28, 2022
            caret
            Q:Is this made in China?
            by|May 17, 2021
            2 Answers
            Answer This Question

            A:  Forodo, yes this ratchet is manufactured in Chian.

            by|May 17, 2021

              A:  It is, and I now regret my purchase!

              by|Jul 15, 2022
              caret
              Q:How long is the handle? I need to replace my old Husky equivalent (model 20202) and I would like it to fit in the same slot in the carrying case.
              by|May 5, 2021
              2 Answers
              Answer This Question

              A:  Take your empty case to the store and see if the ratchet fits.

              by|Dec 10, 2021
              1 found this answer helpful

              A:  Ptarmigan, This ratchets total length is 7-/78 inches, the handle (measured from the base of the ratchet head) measures approximately 6-1/4 inches.

              by|Apr 16, 2022
                2 found this answer helpful
                caret
                Q:Unusual question - can anyone provide the dimensions of this wrench? Specifically the width/diameter and the depth of the head (excluding the knob and the square drive), the depth and width of the knob, the depth of the square drive, and the depth and width of the handle (the section of the handle nearest to the head). The total depth of the head (including the knob and the square drive) would also be nice for verification. The reason I am asking this is I'm planning on using this wrench (after sawing off most of the handle) to prevent a motor backdriving in both directions, using a servo to turn the knob and switch the direction. I considered other options (e.g. self-locking worm drive) and came to the conclusion that this is likely the cheapest option. I need the dimensions to consider viability of using this wrench in the design.
                by|Aug 13, 2020
                1 Answer
                Answer This Question

                A:  TK, We do not recommend you modify ours or any tools to preform this task.

                by|Aug 23, 2021
                  1 found this answer helpful
                  caret
                  Q:I would like a 1/4” ratchet with a thumb drive. Does Husky have?
                  by|Aug 18, 2019
                  1 Answer
                  Answer This Question

                  A:  Yes and quite good!

                  by|Aug 18, 2021
                    1 found this answer helpful
                    caret
                    Q:Does this wrench have a setting that can keep it from turning left or right?
                    by|Sep 3, 2018
                    5 Answers
                    Answer This Question

                    A:  C'mon John, no offense I mean. Price+Brand÷Warranty×Store€=Not in Country (But assembled here from global components(A for effort))

                    by|May 27, 2019

                      A:  No, this has a standard clockwise/anti-clockwise function only.

                      by|Jul 22, 2020
                        2 found this answer helpful

                        A:  John, this ratchet has two ratcheting positions, a clockwise and a counter-clockwise. It does not lock in a non-ratcheting position

                        by|Jul 22, 2020
                          2 found this answer helpful

                          A:  Yes

                          by|Oct 30, 2018

                            A:  Yes

                            by|Dec 19, 2018
                              page 2