Questions and Answers for Husky 6 in. Hack Saw with Comfort Grip Handle

A:  It comes with one blade. Note that it will not cut metal. You can buy blade packs though.

A:  One

A:  Purchased on 12/13/23. It did not come with a blade.

A:  One.

A:  Mine came with one blade, though they wear relatively quickly so I purchased it alongside a pack of replacements. The replacements are very affordable and work great. You can get them at (http://www.homedepot.com/p/Husky-Junior-Hacksaw-Replacement-Blade-4-Pack-122615C/204748783)

A:  1

A:  Unscrew the knob towards the handle to release tension. This will allow you to pop the rear end of the blade out. Let that end continue to drop, and it will be released from the front as it approaches a 90 degree angle from the installed position. To put in the new blade, do the steps in reverse. Put the blade into the front mount so that the pin engages, then pivot the blade into the rear mount and tighten the knob.

A:  The small nut beneath the handle controls tension of the blade. Turn it counterclockwise to release tension until the blade can be removed. Once removed, simply add another blade and ensure its aligned with the indentations on both the nut side and the far end. Once its in the groves, turn the nut clockwise to tighten until it holds the blade snugly. I included photo's of the blade removed for reference.

A:  To change the blade, twist the little nut counterclockwise until it comes off, then push the old blade out of the metal holders and put in the new blade....Screw the nut back on clockwise. Should be good and tight.

A:  Hi Jim, Thank you for your recent inquiry with The Home Depot. Unfortunately, this product does not have a "Bulk Discount" feature. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.

A:  For this kind of order I would consult the Contractor Or Pro Sales Associate in your nearest store. If there’s a discount to be had, these folks will get it for you. And I’ll bet there is.

A:  I have used it to cut through rebar and while it took forever, it got the job done. If it can cut through rebar, it can absolutely cut through CV pipe.

A:  yes

A:  Yes, this saw can be used for cutting wood. However, it may not make a precise cut.

A:  Yes, it worked great cutting hardwood plants and even cactus in my yard.

A:  I have used mine to cut a lot of wood--from trees to various pieces of finished and unfinished wood in my shop. It is excellent at cutting; however, I would not recommend it for precision cuts without some form of guide.