Questions and Answers for Home Decorators Collection McCarthy 18.5 in. 1-Light Bronze Outdoor Wall Lantern Sconce

A:  No.it has to be the entire thing

A:  Nope, I tried. Ordered a few one.

A:  You can try the manufacturer for replacement parts. I haven't had good luck with trying to replace parts for any kind of lighting Sconts

A:  Hello, Please call 800-527-0998 and the customer care agent will be able to help you in ordering the correct piece of glass that has broken. Just make sure you give the agent you are talking to correct model/sku#. This will ensure you get the correct size glass as there are multiple sizes in this family. THX

A:  Of course. Once installed, you just need to select the correct switch to turn on the light.

A:  I used 7 of these lights. Three on my house to replace older lights. In that case 2 of those were activated by one switch on a three way switch. The other on was activated by one switch on a different three way switch. The other four were on new construction on a detached garage. Similarly, two on one switch, one on another and the third of the three way switch activated interior lights. Hope that answers your question.

A:  Yes, this will work in that manner.

A:  yes it is like a standard light, so it depends on how you wire it.

A:  Hello, Yes this work on a 3 way switch. THX

A:  Hello, Please call 800-527-0998 and the agent on duty will be able to assist you in ordering the replacement part you need. Model # 23443 Internet #206240878 Store SKU #1001564135 Please give the agent the information i have pasted here for you. THX

A:  Yes it's possible.

A:  Should not be a problem.

A:  Mine comes on when i open the door to go outside

A:  5 to 30 I believe

A:  Yes you can adjust it. I don’t think it will register out 40 ft. Maybe it will. Should say on the instructions.

A:  Hello, 1. Motion Sensor Range: Up to 30 feet (Varies with surrounding temperature). 2. Sensor Detection Angle: 220º. THX

A:  Yes,it is adjustable.

A:  Hello, Yes you can put this fixture on a inside control dimmer. THX

A:  This light would require a dimming bulb and a dimming switch in order to be a dimmable fixture. So yes, but you will need to do some work.

A:  Yes, I currently have a dimmable light bulb installed with a dimmable smart light switch and it works perfectly

A:  Yes, if you’re using a dimmable bulb.

A:  No,not to home,but to store.

A:  When I bought it 6 months ago it was. Look when you checkout.

A:  No free delivery and if they don't have enough of this product at your store, they won't do a store transfer for you.

A:  Hi Kevin, this item is a store exclusive item, which means it is sold only in stores. I would recommend you contact your local Home Depot store for information on availability.

A:  Since they are in stock at my local store, all I can see is Express Delivery for $8.99 as of this writing (11/14/17). If you add it to your cart you should see options for delivery. I know Home Depot has free 2 day shipping on thousands of items, just not sure if this is one of the items.

A:  No, it doesn't

A:  No, it does not have a photocell.

A:  Yes, it is open at the bottom.

A:  Yes it is

A:  Yes

A:  Yes, there is a opening in the bottom. It's small, but if you have average size hands, you'll be able to screw a bulb in this fixture. I put an LED bulb in mine.

A:  Yes, it's open at the bottom. Be sure you have small hands to screw a bulb in this light fixture. I was able to put an LED bulb in it.

A:  This unit measures 14.88 inches high, 8 inches wide and 9.50 inches depth.

A:  The Medium size is - 14.87 in- Height x 8 inches width x 9.5 in Diameter They have a 10 inch height size also. 6.5 inch size is a smaller one.

A:  Whats the specific problem preventing him from mounting it flush?

A:  You need to adjust the depth of the screw threads protruding to a shorter length so it will tighten flush, also look at your electric box your mounting over to make sure it’s not protruding beyond flush.

A:  Hello, It just takes time and patience to get the mounting crossbar to fit securely. Also it takes time to have the screws the right length to stick out of the fixture for the decorative eye piece to cover screws and holds fixture in place. THX

A:  A difficult question to answer without seeing the installation. If the fixture is hitting the mount box before the wall, it will not mount flush. Might try a siding light mount block to get the required space for it to mount flush.