Q:How do you reverse the direction of the motor? I do not see a switch on the wall plate to do so. I am not talking about reversing the blades. I am talking about reversing the direction the blades turn.
by|Jan 11, 2019
2 Answers
Answer This Question
A: Locate on top of fan motor
by|Jun 23, 2019
1 found this answer helpful
A: The reverse switch is located on the top of the motor housing. Please see page 21 of the instruction manual, available under Info & Guides or copy link: https://images.homedepot-static.com/catalog/pdfImages/04/0452c778-2da5-4e81-9ce5-38f6cc132483.pdf
by|Jun 23, 2019
1 found this answer helpful
Q:Is there a pull chain for the light as well or only wall switch?
by|Nov 2, 2018
4 Answers
Answer This Question
A: Hi,
We had to return it, even though we liked how it looked, we needed a pull chain as well. Hope this helps.
by|Nov 9, 2018
A: Unfortunately, the doesn't have any pull chains for fan and for light it is only operated using the wall remote.
by|Nov 2, 2018
A: Just a switch
by|Nov 9, 2018
A: No, you cannot use a pull chain for this fan.
by|Nov 3, 2018
Q:Is the wall control wireless or hard-wired?
by|Oct 9, 2018
2 Answers
Answer This Question
A: Wireless
by|Jun 23, 2019
A: the wall control provided in the fan is a hard wired type.
by|Apr 2, 2019
1 found this answer helpful
Q:When flush mounted with light kit, what is the height of the fan from ceiling to the light kit. Thanks
by|Apr 21, 2018
2 Answers
Answer This Question
A: Assembled Height with rod is 10.00 in, without rod is approximately 7 in.
by|Jul 10, 2019
2 found this answer helpful
A: About a foot from the ceiling to the bottom of the light.
by|Jul 10, 2019
1 found this answer helpful
Q:Currently we have 2 fans on the porch and two switches in different rooms that activate both fans together. Will the wall control unit work with the 3 way rig that’s setup now?
by|Apr 13, 2018
1 Answer
Answer This Question
A: No. The switch is single pole and pairs to a remote receiver in the fan for the light.
by|Jan 14, 2021
Q:will the wall control fit in a 4 panel rocker switch gang box
by|Apr 12, 2018
1 Answer
Answer This Question
A: It should, variety of wall plates are available to accommodate a wall remote.
by|May 5, 2023
Q:Can this fan be installed without the light kit? Is there a decorative plate included to cover the light kit wiring?
by|Feb 8, 2018
1 Answer
Answer This Question
A: Original light kit must be used on this model fan.
by|May 5, 2023
Q:Of The glass dome is broken where can I get a replacement?
by|Jan 10, 2018
1 Answer
Answer This Question
A: You may order the glass by calling Home Decorators Collection at 1-800-986-3460
by|May 5, 2023
Q:My existing fan runs off a standard wall on / off switch. Can I merely install the included wall control in it's place? Than ks
by|Oct 30, 2017
1 Answer
Answer This Question
A: Please see page 13 of the manual for wall installation of the remote: https://www.homedepot.com/catalog/pdfImages/04/0452c778-2da5-4e81-9ce5-38f6cc132483.pdf
by|Dec 10, 2018
Q:Will this fan operate on a simple on / off fan switch?