Questions and Answers for Home Decorators Collection Molique 54 in. Indoor/Outdoor Natural Iron Ceiling Fan with Light Kit and Wall Control

A:  Yes, you can have to fans on single wall control. Ensure the dipswitch code in the wall control is the same as the codes in the receiver units for each fan.

A:  There are multiple downrods to choose from when you search "extended downrod" on The Home Depot website. Any brand will work as long as the downrod is threaded and has a 3/4 in. interior diameter and a 1 in. exterior diameter. The original finish for this model is Natural Iron, but if you cannot find downrods in that finish, a matte black finish could match closely.

A:  Please call (877) 902-5588 for assistance with replacement parts.

A:  No, the LED bulbs are not compatible on this fan.

A:  Yes, you may use up to 9.5 watt LED bulbs instead of the 13-Watt CFL bulbs that are included.

A:  Yes, you are able to use up to 60 watt incandescent bulbs on this model fan.

A:  No, it is not recommended to be used with incandescent bulbs.

A:  Not recommended, each fan should have its own remote, you may call 1-877-527-0313 for other remote options.

A:  You should if the wall switch and the two fans are all set to the same code. The wall switch and the module for each fan can all be set to the same code. This was done so that you don’t accidentally control your neighbors fan.

A:  Yes, the maximum watts are 9.5 watt LED bulbs.

A:  No, it's not recommended to use LED light bulbs on this.

A:  Yes

A:  No, you must use a fan rated wall switch that has "stepped" fan speed controls. Basically a wall switch that has speed selections 1-3. The dimming of the LED is only possible with the installation of the receiver and the use of the remote. Wall slide controls used to bypass the remotes will not be able to dim the light. Luxtrons are not tested with our fans and are not recommended to use.