A: Yes. If the Commercial Electric track section that have has 2 copper buses on 1 side and 1 copper bus on the other (99% of them do) then yes this T Connector is compatible with your track section.
by|May 4, 2023
A: I used this T-Connector with a Commercial Electric track as well as a Project Source track (from the other place). This and the other Hampton Bay and Commercial Electric track kits seem to be universal with several brands and I highly recommend.
by|May 5, 2023
Q:can I cut the 4 ft. track rail to have 2 ft. on either sid of the T? or do they make 2 ft. rails?
by|Apr 21, 2016
2 Answers
Answer This Question
A: yes you can. I had to do multiple splices in the older home we were working on and also do to the configuration of the ceiling.
by|Feb 23, 2019
1 found this answer helpful
A: Thank you for your recent inquiry with The Home Depot, Mack. The Home Depot cannot advise any customer of how to use the Hampton Bay White T-Connector for Linear Track Lighting. It is to the customer’s discretion of how they use the product. However, any injuries resulting in improper use of product are not the responsibility of the Home Depot. Please be sure to read the instruction manual that comes with your product. We appreciate your business and look forward to serving you in the future. Thank you for shopping with The Home Depot.
by|Feb 23, 2019
Q:Will the Hampton bay track accept Lithonia lights?
by|May 17, 2015
1 Answer
Answer This Question
A: .
by|Apr 17, 2020
Q:Does the T connector also comes in brushed steel finish ?
by|Apr 2, 2015
2 Answers
Answer This Question
A: No, there are 2 color options white or black. however it is made to take paint.
by|Apr 21, 2015
A: I don't think so. I got the white one's and used a good bonding brushed nickel spay paint. Worked like a charm
by|May 5, 2023
Q:I have read the supplied documentation, but do not see that both Right hand/Left Hand configuration is available?? Can the Hampton Bay model EC701WH be field modified for the other configuration?
by|Jan 8, 2015
4 Answers
Answer This Question
A: yes, there are 3 screws holding the top plastic cover, once removed you can change the shape of the T to go on opposite direction. it is very cool
by|Apr 21, 2015
A: Thank you for your recent inquiry with The Home Depot. The Home Depot cannot advise any customer of how to use the product purchased or will be purchased. It is to the customer’s discretion of how they use the product. However, any injuries resulting in improper use of product are not the responsibility of the Home Depot. Please be sure to read the instruction manual that comes with your product. For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376. Thank you for shopping Home Depot.
by|May 3, 2023
A: Yes, I've just done that. The design is good but mine had problems. The T swivels to switch from left handed to right handed. However, My units both switched from left handed to left handed. Not what I needed. It's easy to take off the cover and swap the connectors and switch the wires. Just keep the polarity correct. Just takes a minute.
by|May 16, 2019
1 found this answer helpful
A: I am setting up an “H” shaped track with the center part of the H powered and a T connector on either end. Swiveling the T connector did not change the orientation of the ground, so it only will fit in one side.
by|Oct 19, 2023
Q:Does the T connector come in black or with a black cover? I don't see black as an option in any of the information.
by|Jan 3, 2015
4 Answers
Answer This Question
A: I too wanted a black t-connector as well but couldn't find one. I ended up painting this white one with a black flat paint (Rust-Oleum) and it turned out great. The only issue I ran into was the flat back area with the 'disclaimer' info. For whatever reason, paint nor permanent marker would allow anything to be place over top.
by|May 5, 2023
A: all the parts is made of aluminum , then it comes with standard plastic nice looking white cover in every package there is a replacement plastic cover in black. so if you leave the white plastic cover then it is white, if you replace it with the black one then you have a black fixture. i used the white ..and felt bad throwing a way the black cover.
by|Apr 21, 2015
A: The white connector only comes with a white cover. If you want black, you need to buy the black connector or spray paint the cover black.
by|May 3, 2023
A: Thank you for your recent inquiry with The Home Depot. Unfortunately, we do not stock this item in another color other than those listed. However, we do offer alternate models such as Internet Item #202501639 that may suit your needs. For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376. Thank you for shopping Home Depot.
by|Oct 18, 2019
Q:Can this T-connector be used on left or right side of track?
by|Sep 16, 2014
4 Answers
Answer This Question
A: Either side of a straight track from Hampton Bay. I connected 2—8' and 1—4' track with it.
by|May 3, 2023
A: Yes, it can be used on both. If you remove the cover the T connector swivels to change orientation.
Just be aware that you may have to do some additional work. Mine switched from left handed to left handed. I needed to swap the end connectors and switch the black and white wires. It's easy to do and only takes a minute. Just be sure to keep the polarity straight.
by|May 3, 2023
A: you can use it in both directions. you try it in your setup.for example.. lets say it happens to be a left side, but you need a right side T , all you have to do is unscrew the top 3 screws then you will see a moving elbow. all you have to do is turn it 90 degrees. then you got your self a right side T !!! put the plastic cover back on top and screw the 3 screws you removed