Questions and Answers for Hampton Bay Industrial 60 in. Indoor/Outdoor Brushed Steel Ceiling Fan with Wall Control, Downrod and Powerful Reversible Motor

A:  Thank you for your question. Without knowing which switch you have, we can not answer with 100% accuracy. In general, if you have a commercial grade switch that is capable of handling the power load from the fan's, it should not be an issue. Please note that any switch used must be a variable speed switch, not a dimmer or rheostat switch.

A:  Thank you for your question. The fan has not been tested with that switch, but it should be able to be used instead of the included wall control.

A:  Let us know if it worked Mayur. We or at least I would really appreciate it. Thank you!

A:  Thank you for your question. If not using a switch, we would recommend using 2 remotes. Each fan would need a receiver installed and each remote and receiver pair should be set to a unique dip switch setting to ensure that each remote only controls the intended fan. It is possible to use one remote to control 2 fans if all of the dip switches are set the same, but that can lead to performance issues if the fans get out of sync.

A:  Thank you for your question. No, this fan does not have a pull chain.

A:  Thank you for your question. We would suggest a minimum of 5 ft between the fans.

A:  Thank you for your question. The instructions will be included with the remote. If not, the instructions will be avialable on the product page online. For example, you can see the instructions for the universal remote installation (model # 98130) by downloading the instructions from the "additional resources" section of the product page online. Please note that with the Industrial fan, if using a universal remote, the fan should not be installed with the wall switch. In general, remote receivers should not be connected to any speed control switches.

A:  Thank you for your question. No, the included switches are designed to operate one fan. Connecting two fans can cause an overload and damage the switch. There are commercial grade wall switches available in the market. The Home Depot does not carry the commercial grade switches.

A:  Thank you for your question. No, the fan does not include a receiver. The fan is compatible with any of the Hampton Bay universal ceiling fan remotes. The universal remote will include a receiver. Please note that the fan should not be installed with a remote receiver and connected to the wall switch. If using a universal remote, you will not use the included wall control.

A:  Thank you for your question. The fan is only available for purchase with the 6 inch downrod. The fan is compatible with any 12 or 18" downrod as long as it is a 3/4" inner diameter downrod.

A:  Thank you for your question. No, the fan's direction can only be controlled via the manual reverse switch on the fan.