Questions and Answers for Hampton Bay Industrial 60 in. Indoor/Outdoor Brushed Steel Ceiling Fan with Wall Control, Downrod and Powerful Reversible Motor
A: Thank you for your question. The maximum voltage is 120V.
by|Apr 23, 2024
Q:Will this product: 4-Speed Smart Ceiling Fan Controller, White- https://www.homedepot.com/p/4-Speed-Smart-Ceiling-Fan-Controller-White-93128847/323136328 )work on this fan? If no, can you please provide me with a link to a smart switch for this fan?Thanks
by|Apr 3, 2024
1 Answer
Answer This Question
A: Thank you for your question. No, our fan is UL certified with the wall control included with the fan.
by|Apr 3, 2024
Q:Want to install 3 of these fans in patio. What is needed for connectivity? Prefer all on 1 switch or must I use 3 remotes.
by|Mar 17, 2024
1 Answer
Answer This Question
A: Thank you for your question. Each fan includes a wall switch. Each wall switch is only rated to power one fan. If you want to use one switch to control all 3, you will need a commercial grade fan control. The Home Depot does not carry a commercial grade fan control to operate multiple fans.
by|Mar 19, 2024
Q:How many wires are required for the fan
by|Mar 15, 2024
1 Answer
Answer This Question
A: Thank you for your question. The fan requires 3 wires; Hot, neutral, and ground.
by|Mar 18, 2024
Q:Can I use the light switch to turn on the fan without installing the remote?
by|Mar 10, 2024
1 Answer
Answer This Question
A: Thank you for your question. IF the fan is connected to a on/off switch, the fan will just run at high speed if turned on using the light switch. There will be not way to adjust the fan speed if installed with a light switch.
by|Mar 26, 2024
1 found this answer helpful
Q:Does it come with light?
by|Mar 2, 2024
1 Answer
Answer This Question
A: Thank you for your question. No, this fan does not include a light and is not compatible with any light kits.
by|Mar 4, 2024
Q:Can this be mounted on a slight angle patio?
by|Feb 26, 2024
1 Answer
Answer This Question
A: Thank you for your question. The fan is designed for use on flat ceilings. It is not recommended for angled installation.
by|Feb 29, 2024
1 found this answer helpful
Q:We currently have 8.... 60 ' fans in our garage ( Hangar ) They are controlled by 1 light switch. Outdated and need replaced Will these work ?
by|Jan 20, 2024
1 Answer
Answer This Question
A: Thank you for your question. Without knowing which switch you have, we can not answer with 100% accuracy. In general, if you have a commercial grade switch that is capable of handling the power load from the fan's, it should not be an issue. Please note that any switch used must be a variable speed switch, not a dimmer or rheostat switch.