Q:Is this pump strong enough to provide power to an above ground pool pump and lights?
by|Oct 14, 2020
1 Answer
Answer This Question
A: It is unlikely that the 200W kit would be able to power your pool pump and your lights. To accurately size a system we would need to know the wattage ratings and estimated time of use of the devices. Please reach out to support@grapesolar.com for assistance in sizing a system.
by|Jan 18, 2021
2 found this answer helpful
Q:How long are the included cables?
by|Sep 16, 2020
1 Answer
Answer This Question
A: The cabling included in the mentioned kit (GS-200-KIT-BT) is a 5-Foot Ring-Lug cable (Red and Black) and a 15-foot MC4 comparable cable.
by|Sep 17, 2020
Q:I need the instruction video that use to be on this ad?, how do I get it? It is not on the Grape website.
by|Aug 31, 2020
1 Answer
Answer This Question
A: All of our Off-Grid kits come with a quick connect guide, which gives step by step instructions on how to set up your kit. There is no instructional video that has the current kit components. Please reach out to support@grapesolar.com for assistance with setup.
by|Sep 2, 2020
Q:600 watt hours is not even 1 kilawatt hours charged by the electric company at $.0931 a kilawatt.
so if i run this all year and supposedly get 600 watt hours a day thats equalls 219 kilawatts, that comes out to about $20 worth of electricity, Really it takes over 10 years for this to pay for itself?
how many watts do you get avg all year?
how is this worth it? am i getting something wrong or just scammed again in life.
by|Aug 23, 2020
1 Answer
Answer This Question
A: This kit is meant for off grid purposes only. This will not offset your utility bill, but is intended to be used where utility lines are not available. Production varies greatly by location. Reach out to support@grapesolar.com to see if this system is a good fit for your intended usage.
by|Aug 24, 2020
Q:What size wire do I need to go from the controller to the battery bank? What size battery cables do I need to connect 2 batteries in parallel and then to the inverter?
by|Jul 31, 2020
1 Answer
Answer This Question
A: From the controller to the charge controller, you will need at least 10 AWG wire for the 200W kit. You will need to reach out to your battery manufacturer for assistance on the battery connections.
by|Nov 30, 2022
1 found this answer helpful
Q:Does this have over charge protection I just need something to keep my 2 12 volt deep cycle batteries charged in my RV
by|Jul 25, 2020
1 Answer
Answer This Question
A: The mentioned 200-Watt Off-Grid kit comes with a Comet 40 charge controller. The Comet 40 charge controller has over charge protection.
by|Feb 28, 2021
1 found this answer helpful
Q:I want to set this up to support a 7.2 cubic freezer. will it work for that.
by|Jul 22, 2020
1 Answer
Answer This Question
A: To size a system accurately, we require the wattage ratings of your devices. Please reach out to info@grapesolar.com for assistance with sizing a system.
by|Jul 24, 2020
Q:No info on the charge controller? Must be junk?
by|Jul 9, 2020
1 Answer
Answer This Question
A: Our 200-Watt kit comes with a GS-PWM-Comet-40 Charge Controller. This charge controller is Bluetooth enabled to allow users to view stats via an app (PVChargePro) on their phone. If you have more questions regarding this charge controller, don't hesitate to contact Grape Solar at info@grapesolar.com.
by|Nov 30, 2022
2 found this answer helpful
Q:What is the individual panel size?
by|Jul 9, 2020
1 Answer
Answer This Question
A: The 200-Watt Off-Grid kit includes two 100-Watt Polycrystalline panels. Our 100-Watt panel’s dimensions are 3’5” x 2’3” (L x W).
by|Jul 14, 2020
Q:Recieved only the solar panels with no control module