Q:Can I?ll install total 10 feet height from my garden?
by|Jul 2, 2023
1 Answer
Answer This Question
A: Hello, thanks for your question. This design can be installed in a garden. You'll need to order our item # 403r full size garden pole. You can add additional height with our item # 301-11 11" extension rod or 301-24 24" extension rod.
by|Jul 5, 2023
Q:How much is the total weight?
by|Oct 31, 2022
1 Answer
Answer This Question
A: Hello, The total weight of the Galloping Horse is 5 pounds. This includes the horse figure, directionals, 2 globes and installation rod. If you need additional information please email us at contact@gooddirections.com.
by|Nov 1, 2022
Q:What is the diameter of the garden pole?
by|Feb 4, 2021
1 Answer
Answer This Question
A: Hello,
The diameter of the garden pole is about 3/8”.
by|Feb 5, 2021
Q:what are the dimensions could not find
by|Jun 8, 2020
1 Answer
Answer This Question
A: The dimensions of this item are 24 in. L x 33 in. H x 15 in. W.
by|Jun 10, 2020
Q:Can I put this on my good directions cupola?
by|Jul 12, 2017
2 Answers
Answer This Question
A: you can but wont last long very poor quality
by|Mar 5, 2021
A: Hello Suzy,
Yes this weathervane will work with our Cupolas. Thank you.
by|May 4, 2023
Q:Can I put it on my good directions cupola?
by|Jul 12, 2017
1 Answer
Answer This Question
A: Hello Suzy,
This weathervane will work with our Cupola but you will need a different rod than what comes with the weathervane. Please contact us at 800-852-3002 or Tina@gooddirections.com and we will send you the correct rod to fit into your Cupola. Thank you.
by|May 4, 2023
1 found this answer helpful
Q:Where is this weather vane manufactured?
by|Dec 12, 2016
1 Answer
Answer This Question
A: It is manufactured in the USA.
by|Jul 19, 2019
3 found this answer helpful
Q:Is the weathervane made in such a way that a patina treatment can be applied for a unique finish?
by|Dec 7, 2016
1 Answer
Answer This Question
A: Hello Jason,
Thank you for taking an interest in our products
Yes. A patina solution can be added to this weathervane to speed up the patina process. Please see the solution below that we recommend below.
Natural Patina Finish
If a more weathered or antiqued appearance is desired on your weathervane, we suggest the following:
MIX APPROXIMATELY:
1 Pint of warm water
4 Tablespoons of Table Salt
1 Pint of White Vinegar
Obtain a plastic spray bottle. Mix the above ingredients. Prepare polished figure by rubbing the surface with some form steel wool or Scotch Brite pad. Spray figure liberally with the solution and let dry overnight. Repeat sprayings until the desired look is obtained.
Store remaining solution in separate bottle. The spraying mechanism may corrode if the solution is left in the spray bottle.
This should be applied outside to avoid any damage the solution may cause to nearby objects.