#1 Home Improvement Retailer

Questions and Answers for Global Door Controls Heavy Duty Commercial Grade 1 Door Closer in Duronodic - Sizes 1-6

Internet #203384115

Model #TC4300-DU

Store SKU #1000627352

  • Heavy-duty, cast iron construction with adjustable spring tension
  • Adjustable control sweep, latch closing and backcheck speeds
  • Meets the performance standards of Grade 1, ANSI BHMA A156.4

Questions & Answers

25Questions
caret
Q:can this door closer be used for right and or left sewing door?
by|Apr 27, 2018
2 Answers
Answer This Question

A:  Yes, Right or Left.

by|May 5, 2023

    A:  i already put a long comment about this product and as far as know all of the can be used on any opening because depending on what ever side of the door you are on it opens both ways if you are inside and the door opens to he right well that same door is opening to the left if you are on the out side so i am going to say yes to your question also i put a picture with my last comment

    by|May 5, 2023
      caret
      Q:I need a product that adds little or no resistance to door opening, but ensures that the door closes slowly and softly. Does this product allow for those 2 different requirements to opening and closing?
      by|Mar 21, 2018
      1 Answer
      Answer This Question

      A:  This would be a good choice for that.

      by|May 5, 2023
        caret
        Q:Can you use door closer to keep door open if you like
        by|Feb 27, 2018
        4 Answers
        Answer This Question

        A:  It might, if you ask it to really nice :)

        by|May 3, 2021

          A:  no this does not hold open the one that can hold open is https://www.homedepot.com/p/Global-Door-Controls-Heavy-Duty-ADA-Commercial-Door-Closer-with-Hold-Open-Cush-N-Stop-Arm-in-Aluminum-Sizes-1-6-TC4300HOACNS-AL/207017673

          by|Sep 15, 2019
            2 found this answer helpful

            A:  well you can keep it open like with every door by using a door wedge at the bottom of the door and floor, you can always disconnect the arm or with my door i use it on my deck gate ,i have a hook on the wall behind the door and use a bungee cord that i connect from the hook to the door handle as far as i know this door closer model dose not have a hold open Cush-n-stop arm feature . so if you want a door closer that can be kept open you need to get one with the. hold open Cush-n-stop arm.

            by|May 3, 2021

              A:  NO, it has no option to keep door open.

              by|Mar 5, 2019
                1 found this answer helpful
                caret
                Q:Can you provide a template for the screw holes for this product?
                by|Jan 15, 2018
                1 Answer
                Answer This Question

                A:  If you click on the following link, on page 52 you can see details for the TC4300 Door Closer, and there is will show a diagram of the hole pattern. Hope this is helpful! https://www.impusa.com/wp-content/uploads/2017/01/ImpUSA-Catalog-2017c.pdf

                by|Dec 15, 2020
                  caret
                  Q:I want to replace our current door closer Global R15416 (it leaking oil) with the new one. But I was not able to the new one with the same model number. I do not also want to drill extra holes on the door? What should I do?
                  by|Sep 13, 2017
                  2 Answers
                  Answer This Question

                  A:  Haluk: Thank you for your inquiry with HomeDepot.com. Unfortunately, this item is not sold at Home Depot. Please check with the Door Hardware department of your local Home Depot store to see if this item can be "special ordered". We hope this information is helpful, we appreciate your business.

                  by|May 4, 2023

                  A:  Unforunately, I do not recognize that part number with our global door controls closers. If you were to take measurements of the CTC pattern and call our customer service line, we would be more than happy to help you find a hole-for-hole replacement if we have one! Our number is 1.800.256.7377

                  by|May 5, 2023
                    caret
                    Q:I need to know the measurements between holes,both length wise and width wise? They need to be the same as the old one that is no longer working.
                    by|Aug 10, 2017
                    1 Answer
                    Answer This Question

                    A:  That's not going to happen unless you buy the same door closer. This one has a wide variety of install measurements, plates and bracketry. What you use depends on the application, weather it opens inward or outward, weather it's mounted to the door or the threshold in general, left or right side of the threshold or door, ect.... This closer isn't exactly the easiest install. I'd try to find the same closer if you're someone who doesn't do much work like this. Sorry I couldn't be more helpful.

                    by|Nov 13, 2018
                      caret
                      Q:My business door currently swings both ways (active swinging) and the closer is wearing out where it does not close the door properly anymore. I interested in adding this closer but wondering if this closer will make the door open to the inside of the shop only or can it be mounted that the door is open outward as well.
                      by|Apr 26, 2017
                      2 Answers
                      Answer This Question

                      A:  That first line is funny. Sound's like it started out as a closet door :)

                      by|May 6, 2023

                        A:  This closer would not do the trick for your double-swinging door. What would in fact work extremely well is an overhead concealed closer. This is made specifically for double swinging doors and is made for heavy traffic doors! Our TC7000 Door Closer may be perfect for what you are needing.

                        by|May 5, 2023
                          caret
                          Q:How many mounting applications come with it.
                          by|Mar 15, 2017
                          1 Answer
                          Answer This Question

                          A:  There are four mounting applications.

                          by|May 4, 2023
                            caret
                            Q:Dies this closure have a backcheck ajustment?
                            by|Mar 15, 2017
                            2 Answers
                            Answer This Question

                            A:  Yes it does. It has 3 adjustments. Backcheck, midswing, and final close

                            by|May 5, 2023
                              1 found this answer helpful

                              A:  This closure features the backcheck cushion.

                              by|May 4, 2023
                                caret
                                Q:Can you show me the above door closer to see how it mounts to the door
                                by|Jan 17, 2017
                                2 Answers
                                Answer This Question

                                A:  It mounts flush on either the door or threshold. The body of the closer is covered by a shroud to hide the mounting screws.

                                by|May 6, 2023

                                  A:  I'm afraid I am not 100% sure the question; if you would like a template for instructions or to show the functionality of the closer you can contact our customer service at customerservice@impusa.com , or here is a link to an image which i think accurately represents how one of our closers would look mounted to a door. Hopefully this is of some help to you! https://www.firedoorsafetyshop.co.uk/core/wp-content/uploads/Standard-door-closer.png

                                  by|May 5, 2023

                                    Frequently Bought Together