Questions and Answers for Glacier Bay Del Mar 31 in. W x 18.78 in. D Bath Vanity in Espresso with Cultured Marble Vanity Top in White with Belly Bowl Sink

A:  I have two of these in my house and have never had a problem. The piece will be mounted up against a wall and you will want to run a line of caulk between the top edge and the wall. Other than that I've not had a problem with humidity. Do you normally have a problem with humidity in your bathrooms?

A:  RetiredDIYWidow, Thank you for your inquiry. We can confirm that with directed use, and as long as humidity in the room is controlled, you should not experience any concerns with the quality of the product. If you still wish to add a feature to the finish, we best suggest consulting with a Home Depot team member for recommendations. However, please keep in mind that modifications to the vanity will void your Limited Lifetime Warranty. Best Regards.

A:  I had to read your question several times before I understood that you weren't asking about the sink top but the cabinet. Which is constructed from wood strandboard / MDF (medium density fiberboard). Even though the cabinet is covered by a thin veneer coating, the back and bottom edges are not. And the edges, once soaked in water (and there's water & water vapor in bathrooms) begins to expand. But the fix is quite simple. First, before installation of the sinktop, turn the cabinet upside down. Coat the bottom edges in any paint that you may have. You can buy a small sample jar of "espresso" color to match. Then, when dry, gently nail on round nylon feet on each of the bottom corners. My cabinet came with these feet already installed. The feet elevate the cabinet about 1/2" above the floor. This is sufficient to keep the bottom dry in most situations. Then turn the cabinet on it's front and coat the rear edges.

A:  I purchased and installed this bathroom vanity last year. I used a silicone sealant on the unfinished edges and haven't any problems with the vanity. I'm very happy with this product, looks great and is a perfect fit for a compact bathroom.

A:  Any paint will do as well as anything. Don't forget to coat the parts that touch the floor. They are where the water uptake will come if you are wetness prone. The back isn't likely to deteriorate from airborne humidity. Daily spills, yes. Don't expect a $100 cabinet to become an heirloom regardless of what you do. This unit looks good and works best in low-use and space-challenged rooms.

A:  This model has a height of 36.4''.

A:  36" or 3 feet. Back has a less than 1 inch lip upward. Since I have a drain floor, I place nylon shim to prevent water damage.

A:  36"

A:  JAMES, Thank you for your inquiry. We can confirm that the overall, assembled, height is 36.5 in. tall. Best Regards.

A:  As you may know, Glacier Bay is a Home Depot brand. There isn't a Glacier Bay factory. "Glacier Bay" is a 'catch-all' for whatever deals the HD buyers make. As such, there likely isn't replacement parts available. My suggestion is to buy another cabinet that has the same size & finish doors and put them on your existing vanity. The good news is your vanity uses standard hinges so even if the holes don't line up, you can easily drill new holes to except whatever doors you end up getting. If the cabinet is damaged, I suguest you buy another one. I realize that it'll come with a sink top, but what are you gonna do? HD still sells this model (or one very similar).

A:  Kathy, Thank you for your inquiry. If you feel like what you are experiencing with the Del Mar vanity cabinet is due to a defect in the material or workmanship, our best recommendation would be for you to consult with our Customer Service team. You may reach out to our Customer Service by calling 1-800-235-7747 (Mon-Sat / 8 AM CST-5 PM CST) or by e-mailing them at customerservice@woodcrafters-tx.com. Best Regards.

A:  Hi. It is separate in the box. However it is a complete purchase.

A:  Mike, Thank you for your inquiry. We can confirm that the vanity top and cabinet are not sold separately from each other; the vaniity is only available as a combo. Best Regards.

A:  I think the truck is safer. It will ensure that you do not damage either your product or your SUV. It will also be more comfortable to load and unload.

A:  It will easily fit in an SUV. It is also lightweight although bulky, one person CAN move it alone but with difficulty. Read the description for dimensions and weight. The box will be larger, but you'll have a good idea.

A:  Yes. I was able to fit this in the back of my SUV after I put down the seats.

A:  Junior, Thank you for your inquiry. Yes, we can confirm that it may be best to pick up the vanity in a SUV with a large trunk or truck in order to accommodate space for the packaging. Best Regards.

A:  It fit in the back of my Nissan Pathfinder SUV

A:  It will fit in the back of the suv

A:  I would not use a vanity without an overflow hole

A:  Take it back to home depot. That's a defect.

A:  Mine still good and nice I don’t know why that happened to you.

A:  Mark, Thank you for your inquiry. We can confirm that Espresso and Charcoal are not the same color and would not match; regrettably, we do not manufacture any wall cabinets in the Charcoal finish. Best Regards.

A:  MikeG, Thank you for your inquiry. We can confirm that the 30 in. Del Mar vanity is manufactured out of an engineered wood with an Espresso laminate finish. We would not recommend painting the cabinet as you will be voiding your Limited Lifetime Warranty. Best Regards.

A:  Yes, the cabinet can be painted.

A:  PR, Thank you for your inquiry. We can confirm that installation is not included with the purchase of the vanity. Our best recommendation would be for you to consult with your local Home Depot team members for a list of available contractors in your area. Best Regards.

A:  Hi. No, it is a complete purchase.

A:  Deputy8015, Thank you for your inquiry. We can confirm that the Del Mar vanity cabinet cannot be purchased without the vanity top. Best Regards.