Questions and Answers for GE PowerMark Gold 100 Amp 20-Space 20-Circuit Indoor Main Breaker Value Kit

A:  There is a bonding screw for that.

A:  there will be a green screw in place that needs to be tightened to bond the neutral bus with the ground bus and the container.

A:  Yes there is a tie bar that can be removed if the panel is to be used as a sub panel.

A:  No you can not only full size breaker work

A:  Yes you can.

A:  Yes you can reduce the breaker size. However keep in mind that the conductor feeder size is to always be matched in size to the breaker size.

A:  Yes

A:  No. The safety parameters of your system is compromised when this is attempted

A:  The dimensions of the product are 14 W x 33.1875 H x 4.625 D inches.

A:  33.1875 x 14 x 4.625"

A:  Usually no smaller than 1 1/2 riser to accommodate the wires to each breaker

A:  this panel will accept up to 2.5" pipe size. You can use any size up to that size. The number and size of the conductors that will be run in the conduit dictate the size of he conduit.

A:  This is model TM2010CCU2K.

A:  6-each 1-pole 20-Amp. 1-ea 2-pole 30-Amp & 1-each 2-pole 50-Amp

A:  30 amp 40 and 50 with rest being 20

A:  This kit includes 6 THQP120 single-pole 20 Amp circuit breakers, 1 THQP230 2-pole 30 Amp circuit breaker and 1 THQP250 2-pole 50 Amp circuit breaker.

A:  No you can not the panel is only rated for 125 amps now you can get a main lug convertible to main breaker 200 amps and feed it with a 125 amp breaker use a hold down kit on the breaker

A:  No!

A:  No unless you size the feeder correctly first.

A:  Not with this panel. Not with out changing entire panel.