Questions and Answers for Fluidmaster Reinforced Wax Toilet Bowl Gasket with Flange and Bolts

A:  The ID can be 3 inches. For additional information or help with your product contact Fluidmaster’s Technical Service Department as we are available Monday through Friday from 5:30 AM through 5:00 PM Pacific Standard Time. Contact options include: Chat www.fluidmaster.com/support E-Mail techsupport@fluidmaster.com and Toll Free 800-631-2011.

A:  The above item did not leak and was easy to install. I recommend it.

A:  Model number is 004301-SP, the UPC number is 0-78864-04301-3. The SKU is "256 462" is the number found in the upper-right corner on each of the 6-panels of the product's carton.

A:  The Fluidmaster Model # is 7512 and the Store SKU # is1000706982. For additional questions on this Fluidmaster product contact us at your earliest convenience. Fluidmaster’s Technical Service Department is available Monday through Friday from 5:30 AM through 5:00 PM Pacific Standard Time. Contact options include: Chat www.fluidmaster.com/support E-Mail techsupport@fluidmaster.com and Toll Free 800-631-2011.

A:  I don't see what this has to do with a Reinforced wax toilet bowl gasket made for a toilet base. The question you asked for shower, if you changed the diverter valve in shower, may be upside down. Or you may have the wrong model diverter valve for your shower valve check the package to make sure it fits your shower and then orientation of the valve again if it is the correct replacement part.

A:  CALL A PLUMBER

A:  check that the faucet knob it connected correctly and the valve works properly. If not, you may need a new valve.

A:  I think u have to change both in valve I had the same problem

A:  Nick, You should have it unless one of two things: 1) hot water line is not properly installed in your shower mixer hoot water line side, or 2) shower water mixer is clogged itself and needs re-installation. Please visit this website for add'l information: https://plumbingtoday.biz/blog/why-am-i-getting-hot-water-everywhere-but-the-shower

A:  Yes, it comes with a flange.

A:  No it does not. you will have to purchase that seperately

A:  yes i rebuilt the flange

A:  The kit is complete with new johnny bolts

A:  You will need to purchase that flange. The wax ring has a flange built into it to help guide the toilet on the center of the flange hole.

A:  The Reinforced Wax Toilet Bowl Gasket with Flange and Bolts will have everything you need to reattach a toilet to the floor and seal against the sewer flange. Fluidmaster does recommend using the right amount of wax. To ensure the right amount of wax is used measure the floor depth along with the bowl recess in order to determine if you need a standard wax or a wax that is extra thick..The toilet bowl should sit level on the floor, if the bowl rocks or is uneven on the floor you may want to have some shims available to stabalizre the bowl to the floor. Shims are sold seperately.

A:  None at all.

A:  No, everything you need to secure toilet to flange is in box. You will however need a water supply line thou.

A:  A extra pair of STRONG arms.

A:  Maybe some all purpose sealer for around the base of toilet where it meets the bathroom floor.

A:  No. The Kit Contains all basic hardware to install the toilet bowl to the floor but, you may want to create a good seal and lock of the toilet bowl foot to the floor. Just mark the toilet bowl in the floor and install the WTB Gasket and make a White Caulk ( DAP Model # 18103 Internet # 100097524 Store SKU # 984590 Alex Plus 10.1 oz. White Acrylic Latex Caulk Plus Silicone) sealer base to the bowl. Install the bowl and clear the caulk excess with a wet cloth. Hope it helps!

A:  No you dont need to make any additional purchases with this item.

A:  No. Just put it on and turn over the toilet to fit the flange.

A:  Nope. It was complete in the package.

A:  It came with everything needed. A spatula to remove the old was would have been nice.

A:  5/16

A:  1/4 bolts

A:  I think they were 1/4 inch

A:  5/16

A:  It contains Two (2) Oval Headed Bolts (Brass Color) of 5/16" (6mm) Standard (24^^^^/ per ") American Tread. As I know; 5/16" is Standard for American Style Toilet Bowls Installations.This may be different for Italian and /or other European/Asian Designs which need for special bolts configurations.