Questions and Answers for Fasade Dunes Vertical 2 ft. x 2 ft. Glue Up PVC Ceiling Tile in Oil Rubbed Bronze

A:  Thank you for your purchase of our Fasade Dunes Vertical Glue Up PVC Ceiling Tile in Brushed Aluminum. We recommend using PL Premium by Loctite adhesive to install your panels to your substrate. Make sure your substrate is clean, smooth, dry and flat to allow the panels best adhesion. The panels can be held in place with small tacks until the adhesive fully cures. If you are still having issues, it may be due to faulty adhesive which you may need to exchange at the store. If you have any additional installation questions please feel free to reach out to our customer care team at 800.434.3750. Thank you.

A:  Thank you for your interest in our Fasade Dunes Vertical Glue Up PVC Ceiling Tile in Cross Hatch Silver! We do have Large Profile trim in the matching finish. If you are unable to locate the product on HomeDepot.com you can special order through your local store location. Please feel free to have your store associate contact us at 800.434.3750 and we can provide them with any needed information. Thanks again!

A:  Thank you for your interest in our Fasade Dunes Vertical Glue up PVC Ceiling Tile in Cross Hatch Silver! We can send up to 5 free samples to your local Home Depot location free of charge. Please have the associate at your local store contact our customer care team at 800.434.3750 and we would be happy to get them sent to the store for you. Thanks again!

A:  Thank you for your interest in our Fasade Dunes Vertical Glue Up PVC Ceiling Tile in Cross Hatch Silver! Unfortunately, our Fasade crown molding has been discontinued and not a product that can be ordered. If you are looking for a trim component to border your installation, you can use our Fasade trim components located at the link below. https://www.homedepot.com/p/Fasade-4-ft-Large-Profile-J-Trim-in-Crosshatch-Silver-176-21/203232483 Please feel free to reach out to our customer care team at 800.434.3750. Thanks again!

A:  This product is not suitable for use as a back splash. Mike

A:  Thank you for your interest in our Fasade Dunes Vertical Glue UP PVC Ceiling Tile in Argent Silver. These panels are designed to lay into a grid system, we do not recommend directly applying them to a substrate using adhesive. If you have additional installation questions or are looking for a product better suited to your needs please feel free to reach out to our customer care team at 800.434.3750. Thanks again!

A:  Thank you for your interest in our Dunes Vertical Vinyl Glue-Up Ceiling Tile in Matte White. Yes, our Matte White tiles are able to be painted a desired color. If you have any additional installation or product questions, please feel free to reach out to us at 800.434.3750. Our customer care team would be more than happy to assist you. Thanks again!

A:  Yes, it can be spray painted.

A:  Thank you for your question! The Dunes Vertical 2 ft x 2 ft Glue-up Ceiling Tile is made of a rigid PVC material measuring in .013" in thickness but if adhered to a more solid substrate using it for a headboard installation should be fine. If you have any additional questions please feel free to reach out to our customer care team at 800.434.3750. Thank you!

A:  Thank you for your interest in our products! Great questions! When using the Fasade tiles in a bathroom setting we recommend using a clear silicone or caulk around the edges to ensure no moisture can get behind the tiles. For proper installation we do recommend priming the surface with a oil or latex based primer prior to installation to allow for best adhesion results. As for the seams in the installation, this specific tile has a 1/2" overlapping lip on the top and right side to allow for your project to be as seamless as possible. Please feel free to contact me direct at 800.434.3750 ext1755 for any further questions or assistance. Thanks again! - Britni