Questions and Answers for Fasade 18.25 in. x 24.25 in. Gloss White Waves PVC Decorative Tile Backsplash

A:  This product is very stiff and definitely not pliable. Mike

A:  Thank you for your interest in our products! Our Fasade Waves PVC Decorative Tile Backsplash in Argent Silver is made of a PVC material, not an aluminum product. Please feel free to reference the product overview and details for additional information. Our panels are not recommended to be bent as this could damage or crack the panels. The panels can be installed around a slightly curved surface (such as a slightly rounded kitchen island) but we do not recommend bending the panels at sharp angles. Please feel free to reach out to our customer care team at 800.434.3750 with any additional installation questions you may have. Thank you!

A:  Thank you for your interest in our Fasade Waves PVC Decorative Tile Backsplash in Polished Copper. Our panels are made of a PVC material that can easily/best be cut with a tin snips or utility knife. You can either use our Fasade double sided tape or PL Premium adhesive by Loctite to adhere the panels to your substrate. Please make sure your substrate is smooth, clean, flat and dry and follow the installation guides listed on the website for best instruction. If you have any additional questions please feel free to reach out to our customer care team at 800.434.3750. Thank you!

A:  It can be installed using an adhesive or a double-sided tape and make sure the surface is clean. Start from the bottom left.

A:  Thank you for your interest in our products! Our Fasade Waves PVC Decorative Tile Backsplash in Brushed Aluminum Panels can be finished with our J Trim components to hide any cut edges you may have in your installation. The trim pieces come in both 18" and 4' lengths. If you have any additional questions please feel free to reach out to our customer care team at 800.434.3750. thank you!

A:  No, it is not recommended to be applied over wallpaper.

A:  Thank you for your interest in our Waves PVC Decorative Tile Backsplash in Brushed Aluminum. Typically, we recommend removing the wall paper prior to applying our backsplash panels. However, if the current wall paper has been up for an extended period of time the panels should be able to be installed over the top without the risk of falling. If you have additional installation questions please feel free to reach out to our customer care team at 800.434.3750. Thanks again!

A:  Thank you for your great questions regarding our Waves PVC Decorative Tile Backsplash in Brushed Nickel! We recommend using a PL Premium by Loctite to adhere your panels to your substrate. If you have any additional questions please feel free to contact our customer care team at 800.434.3750. Thanks again!

A:  Thank you for your interest in our Waves Decorative Backsplash Panel in Bermuda Bronze. Unfortunately, we only manufacture the backsplash panels we do not manufacture the sink so we are unsure of the correct information to provide to you. If you have additional questions about the backsplash panels please feel free to reach out to our customer care team at 800.434.3750. Thank you!

A:  Thank you for your interest in our Waves PVC Decorative Tile Backsplash in Galvanized Steel! We recommend our panels be installed with PL Premium construction adhesive by Loctite to ensure proper adhesion and to maintain warranty. If you have additional questions please contact our customer care team at 800.434.3750. Thank you!

A:  Thank you for your great question! Our Waved PVC Decorative Tile Backsplash in Brushed Nickel panels are approximately the width of your typical credit card, so they are relatively thin and your typical outlet cover can be used to go over them without issue. You will want to measure and cut into the panels for space to accomodate your outlet covers. You can then place the panel on your wall and install your outlet cover over the panel. If you have additional installation issues please feel free to reach out to our customer care team at 800.434.3750. Thanks again!

A:  Thank you for your great question! You can install the panels in the direction of your choosing, but it will change the orientation of the pattern as well as the location of the overlapping lip on each of your panels. You would just need to adjust your installation process accordingly. If you have additional questions please feel free to reach out to our customer care team at 800.434.3750. Thank you!

A:  Yes, you can install this vertically.

A:  Thank you for your interest in our Waves Decorative Tile Backsplash in Brushed Nickel! Yes, our panels can be cut to size to fit your installation with a tin snips for ease of install. If you have additional questions please contact our customer care team at 800.434.3750. Thanks again!