Questions and Answers for Fasade 18.25 in. x 24.25 in. Argent Bronze Ripple PVC Decorative Backsplash Panel

A:  Thank you for your interest in our product. Each Fasade Backsplash panel will cover about 3sq ft, given your measurements you would be looking at around 16-20 tiles. Please feel free to contact our customer care team at 800.434.3750 for any further assistance. Thank you!

A:  Thank you for your interest in our product. We do have Fasade kits available for purchase, however these are not a stock item at your local Home Depot store. The Fasade kits are all made to order and able to be ordered at your local store. Please feel free to contact our customer care team at 800.434.3750 for any further questions or needed assistance. Thanks again.

A:  Hello and thank you for your interest in our product. We do also have the Ripple design available in a 4'x8' wall panel as well. Please feel free to contact our customer care team at 800.434.3750 for further questions or needed assistance. Thanks again!

A:  Thank you for your interest in our product. We recommend either the double sided tape, or PL Premium made by Loctite. Please feel free to contact our customer care team at 800.434.3750 for any further questions or needed assistance. Thank you!

A:  USE ANY GOOD TUBE ABHESIVE

A:  Hello and thank you for your interest in our product. The Fasade Decorative Backsplash panels are made of a PVC thermo plastic material that has a tin like appearance to it. Please feel free to contact our customer care team at 800.434.3750 for any further questions or needed assistance. Thanks again!

A:  Hello and thank you for your interest in our product. The Fasade Decorative panels are considered a permanent application and damage to the substrate is possible upon removal. The adhesive used to install these panels is a very aggressive adhesive, you can either us a backing board or install the panels using a small nail instead. Please feel free to contact our customer care team at 800.434.3750 for further trouble shooting assistance. Thanks again!

A:  Hello and thank you for your interest in our product. Yes, tiny nails can be used to install the panels, however this is not our companies recommended installation and will not be warranted. Please feel free to contact our customer care team at 800.434.3750 for further installation assistance. Thank you!

A:  Hello and thank you for your interest in our product. Please contact our customer care team at 800.434.3750 to further assist you with this issue. Thank you!

A:  Hello sophie, The following is part of the installation instructions: Before starting, make sure all surfaces are clean, dry, flat, smooth and free from dust, grease, etc. Lightly sand any glossy surfaces to remove sheen. Clean the back surface of the panels by wiping with a clean cloth and rubbing alcohol. Refer to adhesive manufacturer's directions. So they indicate it must be a smooth surface for proper adhesion, Left click on the photo of the product you are interested in at Home Depot.com. Then detailed installation instructions and product specifications can be found by clicking on the orange arrow beside the word “specification” which is below the photo of this product on Home Depot.com. You will find an installation and user guide in a box to the right. Read this over carefully to see if this is right for you. Thank you for your inquiry. Charlotte from The Home Depot How To Community.

A:  The wall to which you plan to install backsplash panels to needs to be freshly cleaned, free from dust, grease, wax, etc. After you’ve cleaned the wall, be sure that it is dried thoroughly. Acceptable substrates are drywall, plaster or clean, smooth tile (glazed, porcelain type tile; not porous or textured).

A:  Hello and thank you for your interest in our product. The wall to which you plan to install backsplash panels to needs to be freshly cleaned, free from dust, grease, wax, etc. After you’ve cleaned the wall, be sure that it is dried thoroughly. Acceptable substrates are drywall, plaster or clean, smooth tile (glazed, porcelain type tile; not porous or textured). Any damaged, loose or uneven areas must be repaired, patched, leveled and primed. Fill cracks and irregularities with wallboard compound or spackling, then sand smooth with fine-grade sandpaper. Any porous material like highly textured drywall, plywood (or any raw wood without primer), and wallpaper unless removed, sanded and primed, will result in adhesive failure. Please feel free to contact our customer care team at 800.434.3750 for any further questions. Thank you!