Questions and Answers for Fasade 18 in. Smoked Pewter J-Trim

A:  Thank you for your interest in our panels! Our Smoked Pewter color is a complex blend of dark earth tones and deep gun-metal gray. We recommend cleaning your panels with simple soap and water, do not use any abrasive cleaning agents. If you have additional questions please feel free to reach out to us at 800.434.3750. Thank you!

A:  The trim measures 18 inches long, .75 inches wide and .5 inches high.

A:  Thank you for your great question! Our Oil rubbed Bronze J-Trim comes in either 18" or 4' lengths and can accommodate a panel that is up to .07" in thickness. If you have additional product specific questions please feel free to reach out to our customer care team at 800.434.3750. Thanks again!

A:  Yes, they are 18" long. The sheets they go with are 18" x 24", typically run the long way above your countertop. The corner pieces and the J trim are only needed in the corners and to end the splash in the middle of a flat surface.

A:  Thank you for your interest in our products. The Oil Rubbed Bronze J-Trim has a foil finish overlay that matches our Oil Rubbed Bronze backsplash, ceiling, and wall panels. If you have additional product or installation questions please feel free to reach out to our customer care team at 800.434.3750. Thank you!

A:  The walls were a blue-gray. I'm not a gray person, but the boyfriend likes it, so I warmed it up a bit to a taupe color. Its a Behr color called Golden Candlestick Silver. Looks really nice.

A:  Any color you want. I didn't paint a thing.

A:  I painted the walls a chambray blue color

A:  Before the tile is adhered to the wall... yes.

A:  Thank you for your great question! Our Fasade Smoked Pewter J-Trim can be installed over existing tile if you are pairing it with our Fasade panels. Just like with our panels, you need to make sure the substrate you are applying the tiles to is smooth, clean, flat and dry. Any cracks or irregularities need to be filled in, and tiles that have a high gloss on them could be buffed slightly to create a better substrate for the adhesive to attach to. If you have any additional questions please feel free to reach out to our customer care team at 800.434.3750. Thank you!

A:  Thank you for your great question! Our Fasade 18" Smoked Pewter J-Trim is meant to be applied to a clean, smooth, dry, and flat surface. We recommend the surface be have a little texture as possible to ensure proper and even adhesion. If you have any additional installation questions please feel free to reach out to our customer care team at 800.434.3750. Thank you!

A:  I used liquid nail to adhere to a textured wall.

A:  Pick up some tubes of liquid nails in the paint dept. Make sure to read the recommendations to be sure you get one safe for acrylic. These work with caulk guns, and I also purchased a dispenser nozzle that feeds the glue out in many fine lines, rather than one thick one. They're red, plastic, one time use, and cost about $2. Totally worth the cost!

A:  Buy a tube of caulk adhesive. Make sure its rated safe for vinyl. I also purchased a red plastic dispenser that goes over the nozzle of the caulk tube, in the caulk gun, which dispenses the adhesive out in lots of little rows instead of a thick line of it.

A:  Liquid nails.

A:  Great question! The 18in Oil Rubbed Bronze J-Trim can be applied with either PL Premium by Loctite or our double sided tape. Please feel free to reach out to our customer care team with any additional questions of needs at 800.434.3750. Thank you!

A:  Buy the longer length and miter the corners.

A:  Hi JagCapt, Thanks for your question and interest in this item. More information is needed to accurately answer your question. Please contact our Online Customer Service Department at 800-430-3376 to get more assistance with this item. Our hours of operation are between 6:00 a.m. and 2:00 a.m. Eastern Time daily.

A:  That is a great question. Thank you for asking. The trims do not have any clips or fasteners. They butt up together. If you have any questions please call Customer Service at 800.434.3750. Thank you!

A:  Yes.

A:  That's where I have mine installed.

A:  Hello! Thank you for your question! Even though the backsplash panels are fire-retardant, they can be deformed by excessive heat (over 140 degrees Fahrenheit). The panels can be installed above or behind most stoves. Be sure to keep direct heat sources – toaster ovens, cooking burners, etc., a minimum of 3 inches away from the backsplash panel’s surface.

A:  Yes it is :) we have it behind ours and have had no issues at all! We installed using glue instead of the tape.. I think it will hole up better .

A:  Hello! Thank you for your question! Even though the backsplash panels are fire-retardant, they can be deformed by excessive heat (over 140 degrees Fahrenheit). The panels can be installed above or behind most stoves. Be sure to keep direct heat sources – toaster ovens, cooking burners, etc., a minimum of 6 inches away from the backsplash panel’s surface.