Questions and Answers for Elkay Crosstown Undermount Stainless Steel 31 in. Single Bowl Kitchen Sink

A:  Thank you for your question on the Elkay EFRU281610TC Crosstown 16 Gauge Stainless Steel Single Bowl Undermount Sink Kit. A 33" x 22" drop-in sink will fit into a typical sink base cabinet that takes up 36 inches on each wall. It’s still recommended to have a 36-inch cabinet on each wall for this sink since the bowl is 28 inches long.

A:  Thank you for your question on the Elkay HDU32189F Crosstown Stainless Steel Single Bowl Undermount Sink. The corner radius all around are 9/16".

A:  Hello RD, The corner radius all around are 9/16". Thanks for shopping with the Home Depot

A:  It is 9/16 of an inch.

A:  Thank you for your question on the Elkay EFRU2816TC Crosstown 16 Gauge Stainless Steel Single Bowl Undermount Sink Kit. Yes, this model is available as the sink only. It is the Elkay EFRU2816T Crosstown 16 Gauge Stainless Steel Single Bowl Undermount Sink.

A:  Definitely, the sink does need support other than adhesive to the counter. In my case, the installer screwed support blocks to the adjoining cabinets.

A:  Thank you for your question on the Elkay HDU32189F Crosstown Stainless Steel Single Bowl Undermount Sink. This model is shipped with the clips required to mount the sink to the bottom of the countertop. The installer will need to provide the screws to secure the clips.

A:  Hello Sunshine! The corner radius on this sink is 9/16, we recommend reaching out to your installer to see if it will work with your current set up. Thank you for your question!

A:  Mine was installed under mount, I don’t know about using it as a drop-in

A:  Hello Grace! This sink is designed for a undermount application only. We would love to help you find the perfect sink for your current application. Please reach out to our friendly customer care team who would be happy to assist you. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!

A:  Hello TomT! The accessories that come with this Elkay Crosstown stainless steel kitchen sink kit are the recommended bottom grid, durable stainless steel drain, and cleaning kit. Thank you for your question!

A:  Hello Kuterkel! Yes, it is possible to install this reversed, but the drain will then be located on the lower left -hand side which might not be desirable, and be harder with some plumbing situations under the sink. Please feel free to reach out to our friendly customer care team if you have any further installation questions. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!

A:  Hello Dave, Unfortunately this model sink is only available with the drain hole on the right side. If you have any further questions please feel free to contact our friendly Customer Care department. They can be reached at Phone: 800-476-4106 or Email: CustCare@Elkay.com. Thank you for your question!

A:  facing the sink, our drain is on back, right corner. did not see an option for left side drain when ordering.

A:  Hello Kim! Thank you for your interest in our Elkay Crosstown stainless steel kitchen sink. The minimum cabinet size for the installation of this sink is 36 inches. This ensures there is enough room to properly install the mounting hardware. If you have further installation questions we would love to help. Please feel free to reach out to our friendly customer care team for assistance. They can be reached at 800.223.5529 or Consumer@Elkay.com. Thank you for your question!

A:  About 3/4 of an inch to an inch. Check the Specs or Details and find the measurement that shows just the basin.