Q:What is the actual diameter of the hole this makes?
by|Nov 18, 2021
2 Answers
Answer This Question
A: The diameter is 2 inches. We hope this helps!
by|Nov 29, 2021
A: 1/4 in., 1/2 in., 3/4 in, and 1 in.
by|May 6, 2023
Q:Do you have or where can i get an 6" extention for this bit?
by|Jun 5, 2021
3 Answers
Answer This Question
A: Hi Luigi! We'd love an opportunity to help with this. Please contact us and we'll get started right away: https://www.diablotools.com/contact
by|Oct 12, 2021
A: I'm not aware of an extender made for a drill press but you can try one made for a drill/driver.
by|Jun 7, 2021
A: The shank on the bit I have measures 0.371". That means you need a 3/8" bit extender. Lots of companies make bit extenders (e.g., Bosch, Rockler, Milwaukee), but you need to make sure you get one for 3/8" shank and not 1/4".
by|Jun 29, 2021
1 found this answer helpful
Q:Can you add an extension on the end to drill deeper than 3”?
by|Mar 25, 2021
1 Answer
Answer This Question
A: Yes. However, this bit has a 5/16" straight shank so it would have to be an extension that can firmly hold a straight shank bit. Also, the quality and size of the hole may be slightly outside the usual tolerance as the extension increases the runout of the bit.
by|Jan 8, 2024
Q:brocade? las brocas Diablo Forstner steel bit set (4)
by|Mar 6, 2021
1 Answer
Answer This Question
A: 1/4 in., 1/2 in., 3/4 in, y 1 in.
by|Mar 6, 2021
Q:Where is this made?
by|Feb 1, 2021
2 Answers
Answer This Question
A: Hi Uptowngirl! This product is made in Austria.
by|Nov 13, 2021
2 found this answer helpful
A: Mine is marked Austria.
by|Sep 3, 2022
Q:What is the shank diameter?
by|Dec 5, 2020
2 Answers
Answer This Question
A: 3/8
by|Dec 6, 2020
A: Thank you for your inquiry! The shank diameter is 3/8”.
by|Oct 14, 2021
Q:In using a drill press to cut 2" hole into 3/4 plywood, what is recommended RPM for optimal (e.g. clean cut) results?
by|May 22, 2020
1 Answer
Answer This Question
A: Hi ted,
For softwood, the recommended RPMs are from 900-1500.
For Hardwood, the recommended RPMs are from 700-1000.
by|Jun 1, 2020
Q:Need some basic information folks! What sizes are in 4 piece st?
by|May 15, 2020
1 Answer
Answer This Question
A: Hi Diyguy15,
The sizes in the 4PC Forstner Bit set are as follows - 1/4", 1/2", 3/4", and 1" Forstner Bits.
by|Nov 20, 2020
1 found this answer helpful
Q:Can these drill bits be used for clay pots?
by|May 15, 2020
1 Answer
Answer This Question
A: Hi Dave,
We recommend using Diablo Forstner bits in wood only.
by|Jun 1, 2020
Q:Are these bits saw, continuous, or wavy rim?
by|Apr 30, 2020
2 Answers
Answer This Question
A: Thank you for your question! These forstner bits have a straight cutting edge which allows for less splintering and chipping during the cut.
by|Oct 15, 2021
A: Not in the shop now, do remember they are in the form of continuous circular blade. Working really well and durable.