Questions and Answers for Delta Modern Single Hole Single-Handle Bathroom Faucet in Stainless

A:  Thank you for your question, Cesar! The Delta Modern Single Handle Lavatory faucet uses various aerators for different flow rate needs. They can be found in the Replacement Parts Diagram below or in the Info and Guides section. https://images.homedepot-static.com/catalog/pdfImages/97/9735a6e1-563b-4377-a542-e0fec51f8302.pdf Best regards, Edward

A:  I brought it for over two years, which is works properly

A:  Go back to Home Depot and purchase a 12" to 18" reinforced supply lead. Make sure you buy the one for a sink, not a toilet. Install between the original supply and the faucet. Put a loop in the "new" lead if needed in order to get it to fit. The manufacturer didn't skimp, all faucets have leads on the short side. They are not intended to be long enough since there are too many DIY situations for the manufacturer to build a product that will fit all situations.

A:  Had mine installed during bath Reno and plumber didn’t mention any issues. Love this faucet it looks clean and modern.

A:  Just get water supply lines and attach to the faucet. Buy them separately. My lines needed to be over a foot long. Easy inexpensive fix

A:  Thank you for your question, AnaMarie! Model 567LF-PP includes 14 1/2" (368 mm) of supply lines which can be attached to a hose that connects with 3/8" compression fittings. The supply lines themselves can not be removed or replaced however and we apologize for inconvenience this may cause. Best regards, Edward

A:  This is very common as there really isn’t a standard location for placement of water valves under sinks. The easiest thing to do is buy the shortest faucet supply line, connect the large end to the faucet and the small end to the valve. Make a loop with the excess line and you’ll be all set. I have 6 of these faucets and they are very high quality.

A:  I installed this faucet on a 3cm quartz countertop with no need for additional extension for the pop-up rod..

A:  The faucet looks great but does show every water spot on it. I'm constantly wiping it down w a cloth to remove the spots.

A:  Thank you for your question, Mala! Unfortunately we do not offer an extension for our drain assemblies. I apologize for any inconvenience this may cause. Best regards, Edward

A:  Hi Harry, Thank you for your question. The Technical Specifications for the Delta Modern Lavatory 567LF-PP faucet shows the height from the base of the faucet to where the water comes out is 4 3/8" (113 mm). Please see the below link for this information. Please feel free to call, email, or message us on social if there is anything else you need. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

A:  It’s 6”. That’s called the spout reach, listed under specs

A:  Most Kohler faucets sold in the U.S. are made in the U.S. at Kohler's faucet plant in Sheridan, Arkansas. The parts and components that go into Kohler faucets were once made mostly in the U.S. but that has not been true for a number of years. Today they are manufactured in other countries, primarily China and India.Mar 29, 2018

A:  Thank you for your question, Jeni! As our models may be made in different locations depending on available resources, we are unable to provide that information; however, we manufacture Delta faucets in our plant facilities in Greensburg, Indiana; Jackson, Tennessee; London, Ontario, CA and Panyu, China. The back or bottom of the box will tell you where your specific faucet model was made. Best regards, Edward

A:  I am not certain where it is made. I have the faucet in a half bath that is used maybe once a week. I am finding that the finish is not maintaining its luster. Bright chrome is now looking like a spider web.

A:  Hi, Louise! Thank you for your question. The Delta 567LF-PP faucet pop up drain assembly requires a hole size of 1 3/8" (35 mm) Dia. Here is a link to the technical specifications sheet for the measurements for the unit: https://images.homedepot-static.com/catalog/pdfImages/28/28c775f7-aa6a-4447-88fc-1a07eb120e49.pdf Best Regards, Rosanna

A:  Thank you for your question, Mike! This model does include a pop up drain assembly and the lift rod is located on the back of the spout. Best regards, Edward

A:  Love this fixture! It’s convenient and super attractive!

A:  Yes, mine came with all the necessary hardware to install in the sink. It looks great!

A:  Yes it does.

A:  Yes. It comes complete with drain pop up.

A:  yes, sink only faucet

A:  Yes This is a sink faucet

A:  yes it is a sink faucet ~ not a tub faucet

A:  It is a sink faucet.

A:  Yes, this is a bathroom lavatory faucet, NOT bathtub faucet

A:  Made in China

A:  Delta faucets are all made in the United States in the Midwest.

A:  Have no idea but I can tell you is high quality, heavy and works great

A:  No

A:  Hello Ds, Thank you for your question. The Delta Modern Lavatory 567LF-PP faucet does not come with an aerator wrench. The aerator of this faucet unscrew from the end of the spout, where the water comes out. Best regards, Tanya

A:  No not that i recall but simple installation and beautiful product

A:  No