Questions and Answers for Delta Linden Single-Handle Standard Kitchen Faucet with Side Sprayer in Venetian Bronze

A:  Hi Ronp, thank you for contacting Delta Faucet Company! Yes, our 4453-AR-DST spout rotates 120 degrees. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

A:  Hi basha, thank you for contacting Delta Faucet Company! Please reach out to your local Home Depot store for more information regarding stock availability. We appreciate your inquiry. Please reach out directly if you have further questions! Best Regards, Kyra Digital Engagement Specialist

A:  No

A:  Hello Chele, Thank you for your question regarding Delta Faucet 4453-RB-DST! We apologize for any inconvenience you are experiencing, and we will be happy to help! No, the Delta 4453-RB-DST is used for a kitchen faucet. The flow would be too low to fill the bathtub. If you prefer a tub mount faucet, please refer to the link below. Please note we have 2 different versions, one with a hand shower and one without. https://www.homedepot.com/s/delta%2520linden%2520roman%2520tub?NCNI-5 We look forward to better serving you in the future. Please contact us directly with any further questions. Best regards, Kyra Digital Engagement Specialist

A:  Something is off with this faucet…get another one.

A:  Hi Drippy, Thank you for your question about the Delta Faucet model 4453-RB-DST Linden™ Single Handle Kitchen Faucet With Spray In Venetian Bronze. We will be happy to assist you as quickly as possible. If the faucet is dripping or leaking while off, it is likely caused by water debris trapped in the faucet. To flush the faucet, turn the supply off to both the hot and cold-water lines. Once off, turn the handle on the faucet to the on position and leave it there to bleed the lines of any excess water. Next, disconnect the hot water supply line and place it inside of a bucket. Once the line is securely positioned into the bucket, turn on the cold-water supply. Since the handle was left in the on position, the water will flow up the cold supply line, through the faucet cartridge, and back down the hot water line into the bucket. Leave this flowing for at least 30 seconds. After flushing, reconnect the hot water line and repeat this process with the cold water line to ensure all particles have been removed from both supplies. If the issue remains, we recommend replacing the RP50587 Diamond Seal cartridge. https://www.homedepot.com/p/Delta-Single-Handle-Valve-Cartridge-RP50587/202624491 Please contact us directly if you have any questions or need additional assistance. Thank you for being a loyal Delta Faucet customer. We appreciate your business and look forward to continuing to serve you! Best Regards, Bryan Digital Communications Specialist (800) 345-3358 customerservice@deltafaucet.com

A:  Thank you for your question, Coll! Unfortunately, we do not make water filters for Delta Linden model 4453-AR-DST. You may also need to adapt the spout to work with the filter. If so, the spout has 13/16"-27 female threads. Best Regards, Benjamin

A:  Hi Dee, Thank you for your inquiry! I'm very sorry to hear that your faucet is leaking. We would be more than happy to help you with this. Please feel free to call, email, or message us on social. Best regards, Tanya Phone: 1-800-345-3358 | Email: customerservice@deltafaucet.com | Facebook/Twitter: @deltafaucet

A:  10.5"

A:  That measurement is 11-3/8".

A:  10 1/2 inches.

A:  Thank you for your question, NEN. The faucet is 11 3/8" from the deck surface to the tip of the handle in the on position. Best regards, Jon

A:  10 1/4" measurement from base at countertop to top of handle. I have two of these faucets. I first installed one in our utility room and then a year or so later installed one in our kitchen. Both have performed well. I ordered online each time and they were sent to my home and we installed them ourselves.

A:  With the escutcheon, it is approximately 10.5" when off and 11.5" with the water at full force.

A:  Total height is 10 and 1/8th inches, including the deck plate.